Hide Categories

Series 1: Tools, Hardware & Accessories

USD$37.95 ea

Carb Stabilizer Bracket

Carburetor Stabilizer Bracket. These high quality made in Canada stainless steel brackets stabilize the carburetors when the air box is removed. A must have for pods or hard tails!

Fits: Honda CB750K (1969-76)
Part #: 12-0100
USD$38.95 ea

Carburetor Stabilizer Bracket

Carburetor Stabilizer Bracket. Comes with 7mm spacer and 30mm socket head cap screw. These high quality made in Canada stainless steel brackets stabilize the carburetors when the air box is removed. A must have for pods or hard tails!

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport
Part #: 29-0537
USD$11.95 ea

Carb Float Setting Tool (1969-76 Models)

Carb Float Setting Tool. Use this tool to help set your floats with ease!

This pre-set float setting gauge is for the 1969-76K and 1975-76F Supersport models.

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 20-6510
USD$19.95 ea

Carb Float Level Gauge

Carburetor Float Level Gauge. Used to measure the float height between the float and carburetor gasket surface. It is important to make sure the float height is correct to factory spec when tuning your engine. Too little or too much fuel in the float bowl will negatively affect tuning results. Adjustable to fit most carburetors.

Adjustable Width: 16-78mm and Adjustable Height 0-40mm
Part #: 35-0043
USD$12.95 ea

Carb Cleaning Tool Set

Carburetor Cleaning Tool Set. Includes 12 steel wire ends and a small file designed for cleaning nozzles and the tiny holes found in carburetor passages and jets.
Part #: 35-9125
USD$13.95 Set

Carb Cleaning Tool Set

Carburetor Cleaning Tool Set. Includes 20 steel wire ends designed for cleaning the tiny holes found in carburetor jets. Cleaning wire sizes range from 0.45mm to 1.5mm.
Part #: 35-9110
USD$15.95 ea

Carburetor Adjusting Tool

Carburetor Adjusting Tool. Works with Mikuni or Keihin carbs. 11" long tool with a 8mm hex nut and screwdriver slot adjusting bolt. This combo design allows unlocking of the locknut, adjustments to the balancing screw and re-locking the lock nut in one step.
Part #: 35-0084
USD$44.95 ea

Portable Auxiliary Fuel Tank Tool

Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed.

Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.

Part #: 35-9120
USD$69.95 Set

Carburetor Synchronizer Vacuum Gauge ~ 2,3,4 Cylinders

Carburetor and throttle body synchronizer kit for bikes with 2, 3 or 4 Cylinders. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki, and Suzuki models (which typically have 5mm connections) that use sets of 2, 3 or 4 cylinders.

Includes 4 easy to read gauges, Mountable bracket, 180mm extensions - 5mm threads, 65mm extensions - 5mm threads,Necessary hoses, Dampening valves (included to help control needle jump) and instructions.
Part #: 35-0085
USD$13.95 ea

Hose Remover Pliers

Hose Remover Pliers. For easy removal of 5/32" to 1/2" hoses. The jaw digs into the tube to grip it, squeeze and the hose is easily pushed off by the jaw.
Part #: 35-0049
USD$24.95 ea

382pc O-Rings Kit with Plastic Case

382pc O-Rings Kit with Plastic Case. 30 different sizes included in mm's.

QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia.
20X---1.78mm--2.90mm------------13X---2.62mm--9.19mm
20X---1.78mm--3.69mm------------13X---2.62mm--10.77mm
20X---1.78mm--4.47mm------------13X---2.62mm--12.37mm
20X---1.78mm--5.29mm------------13X---2.62mm--13.95mm
20X---1.78mm--6.07mm------------13X---2.62mm--15.54mm
20X---1.78mm--7.65mm------------13X---2.62mm--17.12mm
20X---1.78mm--9.25mm------------13X---2.62mm--18.72mm

10X---3.53mm--18.64mm----------10X---3.53mm--31.34mm
10X---3.53mm--20.22mm----------10X---3.53mm--32.92mm
10X---3.53mm--21.82mm----------10X---3.53mm--34.52mm
10X---3.53mm--23.39mm----------10X---3.53mm--36.10mm
10X---3.53mm--25.00mm----------10X---3.53mm--37.70mm
10X---3.53mm--26.57mm------------7X---5.34mm--37.47mm
10X---3.53mm--28.17mm------------7X---5.34mm--40.65mm
10X---3.53mm--29.75mm------------7X---5.34mm--43.82mm
Part #: 35-0066
USD$29.95 ea

419pc O-Rings Kit with Plastic Case

419pc O-Rings Kit with Plastic Case. 32 different sizes included metric sizes.

QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia.
20X---1.50mm--3.00mm------------13X---2.50mm--11.00mm
23X---1.50mm--7.00mm------------14X---2.50mm--13.00mm
23X---1.50mm--10.0mm------------13X---2.50mm--14.00mm
23X---1.50mm--13.0mm------------14X---2.50mm--16.00mm
20X---2.00mm--4.40mm------------14X---2.50mm--18.00mm
18X---2.00mm--5.00mm------------13X---2.50mm--19.00mm
14X---2.50mm--10.0mm------------14X---2.50mm--21.00mm

13X---2.50mm--22.00mm----------10X---3.50mm--31.00mm
10X---3.50mm--18.00mm----------10X---3.50mm--33.00mm
10X---3.50mm--20.00mm----------10X---3.50mm--34.50mm
10X---3.50mm--22.00mm----------10X---3.50mm--36.00mm
10X---3.50mm--23.50mm----------10X---3.50mm--38.00mm
10X---3.50mm--25.00mm----------10X---3.50mm--41.00mm
10X---3.50mm--26.50mm----------10X---3.50mm--44.00mm
10X---3.50mm--28.00mm----------10X---3.50mm--47.00mm
10X---3.50mm--30.00mm----------10X---3.50mm--50.00mm
Part #: 35-0067