Series 1: Tools, Hardware & Accessories
- Brake,Tire & Wheel Tools
- Carburetor Tools
- Electrical Tools
- Engine, Steering & Clutch Tools
- Miscellaneous Tools
- Service Manuals, Owners Manuals
- Fasteners & Hardware
- Cargo Nets, Tie Downs, Motorcycle Covers
- Rim, Helmet & Seat Locks
- VintageCB750 Apparel / Honda Merchandise
×
USD$66.55 ea
CB750 Engine Stand
CB750 SOHC Engine Rebuild Stand. Make your engine rebuild a lot easier with this engine stand. Very rigid and easily secured to your work bench using holes found in the base of the stand. Powder coated gloss black for a durable finish.
High Quality, Made in the USA.
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-1162
High Quality, Made in the USA.
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-1162
USD$20.95 Set
Vintage Motorcycle Tool Set
Vintage Motorcycle Tool Set. Have you lost the original tool set that came with your motorcycle? Well, we have a great alternative for you!
This 8 pc set features many of the same tools that came with your bikes stock tool kit. To check out the exact contents included check out the picture. All contained within a durable pouch.
Features Wrenches 8/10, 12/14 and 14/17
Note: These may not be 100% identical to your bikes OEM tool kit (check the photo for differences) but are very similar and several of the tools are likely identical. A great option at an amazing price!
Part #: 73-0078
This 8 pc set features many of the same tools that came with your bikes stock tool kit. To check out the exact contents included check out the picture. All contained within a durable pouch.
Features Wrenches 8/10, 12/14 and 14/17
Note: These may not be 100% identical to your bikes OEM tool kit (check the photo for differences) but are very similar and several of the tools are likely identical. A great option at an amazing price!
Part #: 73-0078
USD$12.55 ea
Ignition Switch Nut Tool
Ignition Switch Nut Tool, used to loosen and tighten the ignition switch nut properly without causing any damage to the switch.
Fits: Honda CB750K (1969-76) Ignition Switch
Part #: 35-9119
Fits: Honda CB750K (1969-76) Ignition Switch
Part #: 35-9119
USD$12.95 ea
Right Angled Snap Ring Plier Set
Right Angled Snap Ring Plier Set - Reaches in deep to remove clips when rebuilding master cylinders.
Part #: 35-0009
Part #: 35-0009
USD$22.15 ea
T Handle Torx Key Set
T Handle Torx Key Set of 10 with Stand. Includes sizes T9, T10, T15, T20, T25, T27, T30, T40, T45 and T50. The T-Handle design delivers maximum torque to the fasteners.
Part #: 35-0041
Part #: 35-0041
USD$18.45 Set
T Handle Hex Key Set (Metric Type)
T Handle Hex Key Set (Metric Type), with Metal Holder.
Contains Sizes- 2.0mm, 2.5mm, 3.0mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 8.0mm, 10.0mm
Part #: 35-0054
Contains Sizes- 2.0mm, 2.5mm, 3.0mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 8.0mm, 10.0mm
Part #: 35-0054
USD$18.45 Set
T Handle Hex Key Set (SAE Type)
T Handle Hex Key Set (SAE Type), with Metal Holder.
Contains Sizes- 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8".
Part #: 35-0053
Contains Sizes- 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8".
Part #: 35-0053
USD$25.85 Set
T Handle Wrench Set
7pc T Handle Wrench Set/Socket Set.
Set includes 8mm, 10mm, 12mm, 14mm and 17mm 6 point socket wrenches and one phillips #2 and #3 screwdriver tips.
Part #: 35-9101
Set includes 8mm, 10mm, 12mm, 14mm and 17mm 6 point socket wrenches and one phillips #2 and #3 screwdriver tips.
Part #: 35-9101
USD$4.40 ea
T-Handle Allen Wrench
Out of Stock
Email Me When Available
T-Handle Allen Wrench, 5mm Size.
Part #: 35-0131
Part #: 35-0131
USD$4.40 ea
T-Handle Allen Wrench
Out of Stock
Email Me When Available
T-Handle Allen Wrench, 6mm Size.
Part #: 35-0082
Part #: 35-0082
USD$85.05 Set
Metric Tap & Die Set
40 pc. Metric Tap & Die Set in storage case.
Set includes Pitch Gauge, Die Holder, 2 Tap Wrenches & screw driver +
Metric Taps - M3 x 0.5, M3 x 0.6, M4 x 0.75, M4 x 0.7, M5 x 0.8, M5 x 0.9,
M6 x 1.0, M6 x 0.75, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8x 1.25, M10 x 1.25,
M10 x1.5, M12x 1.25, M12 x 1.5, 1/8NPT x 27
Metric Dies - 17 Dies to match taps listed above.
Part #: 35-8030
Set includes Pitch Gauge, Die Holder, 2 Tap Wrenches & screw driver +
Metric Taps - M3 x 0.5, M3 x 0.6, M4 x 0.75, M4 x 0.7, M5 x 0.8, M5 x 0.9,
M6 x 1.0, M6 x 0.75, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8x 1.25, M10 x 1.25,
M10 x1.5, M12x 1.25, M12 x 1.5, 1/8NPT x 27
Metric Dies - 17 Dies to match taps listed above.
Part #: 35-8030
USD$5.15 ea
Spring Puller
Spring Puller, Made from Heat Treated Alloy Steel. Great for Removing and Installing Those Hard to Reach Springs.
Part #: 35-0113
Part #: 35-0113
USD$23.65 Set
8pc. Hex Bit Socket Set (140mm.)
8 pc. Driver Set for Allen Socket Screw
Hard to find deep 140mm. Long bits ideal for reaching up
inside lower fork legs and other recessed spots. Kit includes
1/2" drive socket sizes 5, 6, 7, 8, 10, 12, 14 & 17mm.
Part #: 35-9049
Hard to find deep 140mm. Long bits ideal for reaching up
inside lower fork legs and other recessed spots. Kit includes
1/2" drive socket sizes 5, 6, 7, 8, 10, 12, 14 & 17mm.
Part #: 35-9049
USD$5.15 Set
Folding Socket Set
5pc Folding Socket Set with Sliding T Handle Driver, comes with 8mm, 10mm, 12mm and 13mm sockets. 1/4 Drive.
Part #: 35-0077
Part #: 35-0077
USD$36.20 ea
3/8" Drive Click Type Torque Wrench Tool
3/8" Drive Window Click Type Torque Wrench Tool with Black Plastic Storage Case. 10-100Ft. Lbs.
This click-style torque wrench easily tightens various automotive bolts, from lugs and crankshaft bolts to cylinder heads and engine-mountings. Measures from 10 to 100 foot/pounds in .5 increments.
Part #: 35-0099
This click-style torque wrench easily tightens various automotive bolts, from lugs and crankshaft bolts to cylinder heads and engine-mountings. Measures from 10 to 100 foot/pounds in .5 increments.
Part #: 35-0099
USD$16.25 Set
Impact Screwdriver with Bit Set
Impact Screwdriver with bit set in case. A must have tool used to break loose engine screws with slot or phillips heads.
Part #: 35-0095
Part #: 35-0095
USD$14.75 ea
Impact Driver with Bit Set
Heavy Duty #2500 Impact Driver with 2 Phillips and 2 Slotted 2" long hex bits in a metal case. This driver is 3/8" drive and can also be used with any 3/8" drive socket.
Part #: 35-0106
Part #: 35-0106
USD$4.40 Set
Impact Driver Bit Set (Short type)
Impact Driver Bit Set (Short type)
Replacement Driver Bit Set (1.5" Long) - Set contains 2 Phillips & 2 Slotted impact driver Bits.
Part #: 35-0107
Replacement Driver Bit Set (1.5" Long) - Set contains 2 Phillips & 2 Slotted impact driver Bits.
Part #: 35-0107
USD$4.40 Set
Replacement Driver Bit Set ( 3" Long )
Impact Driver Bit set (Long type)
Replacement Driver Bit Set ( 3" Long ) - Set contains 2 Phillips & 2 Slotted impact driver Bits.
Part #: 35-0110
Replacement Driver Bit Set ( 3" Long ) - Set contains 2 Phillips & 2 Slotted impact driver Bits.
Part #: 35-0110
USD$11.05 ea
JIS Screw Bit Set
JIS Type 6 Pc. Screw Bit Set with Caribiner Holder. Includes 25mm Bits - PH1, PH2, PH3 and 25mm Torsion Bits (designed to stand up to the rigors of heavy duty impact driving) PH1, PH2, PH3.
Most screws used on Japanese motorcycles are NOT phillips but JIS type (Japanese Industry Standard). JIS screws look like a phillips end but have a tiny dot stamped onto the face.
It is important to use these correct JIS type bits when working on your motorcycle as phillips bits ARE different and using them are more likely to result in stripping/slipping screws. Get this correct set of JIS bits for your motorcycle today!
Part #: 35-0047
Most screws used on Japanese motorcycles are NOT phillips but JIS type (Japanese Industry Standard). JIS screws look like a phillips end but have a tiny dot stamped onto the face.
It is important to use these correct JIS type bits when working on your motorcycle as phillips bits ARE different and using them are more likely to result in stripping/slipping screws. Get this correct set of JIS bits for your motorcycle today!
Part #: 35-0047
USD$11.05 Set
Screw Extractor Set
5pc Screw Extractor Set - used to remove broken off studs, bolts, & screws. Set includes sizes - 1/8", 3/16", 15/64", 5/16", & 3/8"
Part #: 35-9048
Part #: 35-9048
USD$14.00 ea
Stud Extractor 1-6mm
Out of Stock
Email Me When Available
Stud Extractor 1/4" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench.
Fits studs from (1-6mm)
Part #: 35-0102
Fits studs from (1-6mm)
Part #: 35-0102
USD$18.45 ea
Stud Extractor 6-12mm
Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench.
Fits studs from (6-12mm)
Part #: 35-0103
Fits studs from (6-12mm)
Part #: 35-0103
USD$13.30 ea
Extractor & Drill Set
10 Piece Extractor & Drill Set in a Plastic Case. Set contains 5X extractors (#1 through #5) and 5X mechanic's length cobalt drills. Removes bolts and screws up to 5/8".
Cobalt Drill and Screw Extractor Sizes: 5/64", 7/64", 5/32", 1/4", 19/64"
Part #: 35-0100
Cobalt Drill and Screw Extractor Sizes: 5/64", 7/64", 5/32", 1/4", 19/64"
Part #: 35-0100
USD$16.25 Set
Pin Punch Set
8 pc. Metric Pin Punch Set
Set includes small sizes usually not available:
1.5mm, 2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm, 5.5 mm,
6.0 mm, & 8.0 mm in storage case
Part #: 35-9050
Set includes small sizes usually not available:
1.5mm, 2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm, 5.5 mm,
6.0 mm, & 8.0 mm in storage case
Part #: 35-9050
USD$7.35 Set
Hook and Pick Set
5pc Hook and Pick set with magnet in handle end.
Part #: 35-9038
Part #: 35-9038
USD$7.35 ea
Round Magnetic Parts Dish
Round Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 149mm Diameter, 40mm Height.
Part #: 35-0097
Part #: 35-0097
USD$11.05 ea
Rectangular Magnetic Parts Dish
Rectangular Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 9.5" Length, 5.5" Width, 1.1" Height.
Part #: 35-0098
Part #: 35-0098
USD$6.60 ea
Graduated Cylinder
250 ml Graduated Cylinder
250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids.
Part #: 35-2210
250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids.
Part #: 35-2210
USD$7.35 ea.
Graduated Cylinder
Out of Stock
Email Me When Available
500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oils and other fluids.
Part #: 35-2211
Part #: 35-2211
USD$8.10 ea
Graduated Cylinder
1,000cc (1 Liter) plastic Graduated Cylinder for accurate measuring of fluids.
1 US Quart = 946cc (946ml.)
Part #: 35-2212
1 US Quart = 946cc (946ml.)
Part #: 35-2212
USD$12.55 ea
Heavy Duty Hose Cutter
Heavy Duty 50mm Aluminum Hose Cutter. Features a high carbon steel blade perfect for cutting all types of rubber, tubes or soft plastic.
Part #: 35-0039
Part #: 35-0039
USD$11.80 ea
Oil / Fluid Container ~ 2 Liter
2 Liter Oil / Fluid Container with Long Spout.
Part #: 35-0088
Part #: 35-0088
USD$12.55 ea
Oil / Fluid Container ~ 4 Liter
4 Liter Oil / Fluid Container with Long Spout.
Part #: 35-9104
Part #: 35-9104
USD$5.55 ea
Fluid Hose Clamp
Fluid Hose Clamp, all steel construction with adjustable locking collar. Completely or partially closes flexible brake, fuel, and vacuum fluid lines.
Part #: 35-9117
Part #: 35-9117
USD$9.60 ea
Hose Remover Pliers
Hose Remover Pliers. For easy removal of 5/32" to 1/2" hoses. The jaw digs into the tube to grip it, squeeze and the hose is easily pushed off by the jaw.
Part #: 35-0049
Part #: 35-0049
USD$7.05 ea
Flexible Metal Funnel
Out of Stock
Email Me When Available
Metal Funnel with 14" detachable metal nozzle.
Part #: 35-8040
Part #: 35-8040
USD$9.60 ea
Brush Cleaning Tool
Blue Chain Cleaning Brush/ Gear Cleaner Tool.
Part #: 35-0055
Part #: 35-0055
USD$4.40 ea
Cable Luber - Pressure Type
Cable Luber - Pressure type (Sold each)
Water & dirt are blown down cable by lubricant when pressure spray can nozzle is applied. Spray lube sold by most bike shops.
Part #: 35-0108
Water & dirt are blown down cable by lubricant when pressure spray can nozzle is applied. Spray lube sold by most bike shops.
Part #: 35-0108
USD$11.80 ea
Air Duster
Out of Stock
Email Me When Available
Air Duster, Comes with 2 Tips.
Part #: 35-8042
Part #: 35-8042
USD$8.10 ea
Brass Air Coupler Set
Brass Air Coupler Set, 5 Pc. Air Tool Quick Coupler Set.
Part #: 35-9041
Part #: 35-9041
USD$16.25 ea
Aluminum Vise Insert
Aluminum Vise Insert. A perfect addition to make your workbench vise more versatile. Three machined semi circles to hold 5/16" to 9/16" size parts you need to grip. The bridge spring keeps the jaws aligned and allows the inset to open precisely with the vise.
Part #: 35-0068
Part #: 35-0068
USD$8.85 ea
Flexible Magnet Tool
Out of Stock
Email Me When Available
Flexible Rod with magnetic tip. 23" Long, picks up to 3.5 Lbs.
Part #: 35-9036
Part #: 35-9036
USD$8.85 Tube
Autosol Chrome Polish (R)
(50 gram/ml) tube of Autosol Metal Polish.
Cleans, polishes, protects and removes corrosion.
For all metal parts-chrome, brass, copper, nickel,
stainless steel & aluminum.
"A product that is superior to anything else available" - has won awards and several medals on an international level.
Part #: 05-9004
Cleans, polishes, protects and removes corrosion.
For all metal parts-chrome, brass, copper, nickel,
stainless steel & aluminum.
"A product that is superior to anything else available" - has won awards and several medals on an international level.
Part #: 05-9004
USD$11.80 ea
Three Bond Thread Lock
Three Bond Thread Lock - 0.34 Oz, 10ml. Low Strength, Removeable, Frequent Repair Type.
Perfect for adding an extra hold to small screws and bolts which are frequently removed. Adds an extra hold of 10-20% greater then that of basic tightening. Blue in color.
Part #: 05-0005
Perfect for adding an extra hold to small screws and bolts which are frequently removed. Adds an extra hold of 10-20% greater then that of basic tightening. Blue in color.
Part #: 05-0005
USD$7.35 ea
Three Bond Super Glue
Three Bond Super Glue (Gel Tyle) General Purpose Adhesive - 0.07 Oz, 2ml.
Three Bond Super Glue attains practical-use strength in seconds. Contains no evaporative elements, so there's never any shrinkage to weaken bonding points. Excellent for nonporous materials. Made in the U.S.A.
Part #: 05-0004
Three Bond Super Glue attains practical-use strength in seconds. Contains no evaporative elements, so there's never any shrinkage to weaken bonding points. Excellent for nonporous materials. Made in the U.S.A.
Part #: 05-0004