Series 1: Tools, Hardware & Accessories
- Brake,Tire & Wheel Tools
- Carburetor Tools
- Electrical Tools
- Engine, Steering & Clutch Tools
- Miscellaneous Tools
- Service Manuals, Owners Manuals
- Fasteners & Hardware
- Cargo Nets, Tie Downs, Motorcycle Covers
- Rim, Helmet & Seat Locks
- VintageCB750 Apparel / Honda Merchandise
USD$12.95 ea
Right Angled Snap Ring Plier Set
Right Angled Snap Ring Plier Set - Reaches in deep to remove clips when rebuilding master cylinders.
Part #: 35-0009
Part #: 35-0009
USD$17.70 ea
Caliper Piston Tool
Brake Caliper Piston holding/detaching Tool for brake calipers.
Grabs Brake Caliper Pistons internally so seized pistons can be worked loose from the caliper.
Part #: 35-1086
Grabs Brake Caliper Pistons internally so seized pistons can be worked loose from the caliper.
Part #: 35-1086
USD$5.90 Set
Spoke Wrench Set
Spoke Wrench Set - A must have for lacing, truing & tightening spokes.
2Pc. Set - Fits: #8,9,10 & 11 nipple sizes.
Part #: 35-0109
2Pc. Set - Fits: #8,9,10 & 11 nipple sizes.
Part #: 35-0109
USD$4.80 ea
6-Way Spoke Wrench
6-Way Spoke Wrench, Fits #7 Thru #12 Nipple Sizes.
Part #: 35-0094
Part #: 35-0094
USD$9.60 ea
Tire Lever - Fusil Type
Tire Lever - Fusil Type w Chrome Finish - For those tough tires needing lots
of leverage to remove. You need 2-3 of these to do the job!
Part #: 35-0079
of leverage to remove. You need 2-3 of these to do the job!
Part #: 35-0079
USD$9.60 ea
Tire Lever - 16" Long Dunlop Type
Tire Lever - 16" Long Dunlop Type - For those tough tires needing lots of leverage to remove. You need 2-3 of these to do the job!
Part #: 35-0080
Part #: 35-0080
USD$8.85 ea
Tire Lever - 11" Spoon Type w Handle
Tire Lever - 11" Spoon Type, Forged Steel with Plastic Handle.
Part #: 35-0060
Part #: 35-0060
USD$13.30 ea
Tire Lever - 16.5" Spoon Type w Handle
Out of Stock
Email Me When Available

Tire Lever - 16.5" Spoon Type, Forged Steel with Plastic Handle.
Part #: 35-0063
Part #: 35-0063
USD$5.90 ea
Tire Bead Tool
Tire Bead Tool. It holds the tire bead down in the drop center of the rim during tire changes and makes tire changes easier. Nylon securing screw keeps rim scratch free. Lightweight and compact tool.
Part #: 35-0075
Part #: 35-0075
USD$19.20 ea
Tire Bead Breaker Tool
Out of Stock
Email Me When Available

Heavy Duty Tire Bead Breaker Tool with strong welded bar plate and heavy 20" long handles with comfortable grips.
Part #: 35-3045
Part #: 35-3045
USD$22.15 ea
Tire Inflator
Tire Inflator, 3 Function Inflator, 2" Dial Guage 0-160PSI / 0-11KPA, 12" Hose With Chuck.
Part #: 35-9042
Part #: 35-9042
USD$3.35 ea
Tire Pressure Gauge
Tire Pressure Gauge, Dial Type, Measures From 10-60 PSI.
Part #: 35-0093
Part #: 35-0093
USD$11.05 ea
Digital Tire Pressure Gauge
Digital Tire Pressure Gauge, LCD Display, Measures From 1-100 PSI.
Part #: 35-0089
Part #: 35-0089
USD$5.15 ea
Spring Puller
Spring Puller, Made from Heat Treated Alloy Steel. Great for Removing and Installing Those Hard to Reach Springs.
Part #: 35-0113
Part #: 35-0113
USD$3.35 Set
Rim Savers Set
Nylon Rim Savers (Set/2)
Designed to protect rims from damage caused by tire irons when installing tires on rims.
Part #: 35-5101
Designed to protect rims from damage caused by tire irons when installing tires on rims.
Part #: 35-5101
USD$8.85 ea
Wheel Weight Wrench
Wheel Weight Wrench Tool for installing and removing spoke or mag type wheel weights.
Part #: 35-9059
Part #: 35-9059
USD$65.10 ea
Vacuum Brake Bleeder Tool
Brake Bleeder Tool
High Quality Vacuum Brake Bleeder Tool suitable for motorcycle use.
All metal construction, This is the best way to get the job done quickly.
Note: Do not use this tool with Speed Bleeders.
Part #: 35-3050
High Quality Vacuum Brake Bleeder Tool suitable for motorcycle use.
All metal construction, This is the best way to get the job done quickly.
Note: Do not use this tool with Speed Bleeders.
Part #: 35-3050
USD$9.60 Kit
Brake Bleeder Hose Kit
Brake Bleeder Hose Kit. Kit includes 1-way valve, hose and clamps.
This tool helps bleed motorcycle brakes quickly and easily. The 1-way valve prevents air from flowing back into the brake lines. Easy to use, simply connect and pump.
Part #: 35-0072
This tool helps bleed motorcycle brakes quickly and easily. The 1-way valve prevents air from flowing back into the brake lines. Easy to use, simply connect and pump.
Part #: 35-0072
USD$50.30 Set
Wheel Bearing Remover Set
8 Piece Metric Wheel Bearing Remover Set in a Plastic Case. Includes a large and small driver with 10mm, 12mm, 15mm, 17mm, 20mm and 25mm removers. Dependable split collet design.
Part #: 35-0092
Part #: 35-0092
USD$24.40 ea
Front Wheel Bearing Retainer Ring Tool
Front Wheel Bearing Retainer Ring Tool. High quality tool for removing and fitting the front wheel bearing retainer ring with 1/2 inch socket bar wrench tool hole. The perfect tool for easier removal and fitting without damaging the special retainer ring.
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-0186
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-0186
USD$31.80 ea
Rear Wheel Bearing Retainer Ring Tool
Rear Wheel Bearing Retainer Ring Tool.
High quality tool for removing and fitting the rear wheel sprocket hub bearing retainer ring with 1/2 inch socket bar wrench tool hole.
OR
removing and fitting the rear wheel sprocket carrier bearing retainer ring.
The perfect tool for easier removal and fitting without damaging the special retainer ring.
Removes Rear Wheel Sprocket Carrier Bearing Retainer Ring on the
Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Removes Rear Wheel Hub Bearing Retainer Ring on the
Honda CB750K (1969-78),
CB750A (1976-78) Hondamatic
Part #: 73-0187
High quality tool for removing and fitting the rear wheel sprocket hub bearing retainer ring with 1/2 inch socket bar wrench tool hole.
OR
removing and fitting the rear wheel sprocket carrier bearing retainer ring.
The perfect tool for easier removal and fitting without damaging the special retainer ring.
Removes Rear Wheel Sprocket Carrier Bearing Retainer Ring on the
Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Removes Rear Wheel Hub Bearing Retainer Ring on the
Honda CB750K (1969-78),
CB750A (1976-78) Hondamatic
Part #: 73-0187
USD$103.55 Set
Blind Hole Bearing Puller Set
Blind Hole Bearing Puller Set
Includes 2.15LB Slide Hammer With Shaft & 8 Pc Of Bearing Collets.
Pulls The Following Size Bearings: 8-10mm, 10-12mm, 12-14mm, 15-17mm, 17-20mm, 20-24mm, 25-29mm, 30-32mm
Part #: 35-8010
Includes 2.15LB Slide Hammer With Shaft & 8 Pc Of Bearing Collets.
Pulls The Following Size Bearings: 8-10mm, 10-12mm, 12-14mm, 15-17mm, 17-20mm, 20-24mm, 25-29mm, 30-32mm
Part #: 35-8010
USD$28.10 Kit
Safety Wire Nut & Metric Bolt Drill Jig Kit
Safety Wire Nut & Metric Bolt Drill Jig Kit. Contains one nut drill jig and one metric bolt jig. Jig set designed for accurate drilling of nuts and bolts for use with safety lock wire. Both jigs can be mounted in a vice for drilling. The nut drill jig allows the safety wire holes to be drilled through the head of bolts or through nuts, across the diagonal easily. Accepts up to a 3.5mm diameter.
Metric bolt drill jig provides 6 drill holes for metric sizes 6 X 1.0, 8 X 1.0, 8 X 1.25, 10 X 1.25, 10 X 1.5 and 12 X 1.5 bolts.
Part #: 35-0064
Metric bolt drill jig provides 6 drill holes for metric sizes 6 X 1.0, 8 X 1.0, 8 X 1.25, 10 X 1.25, 10 X 1.5 and 12 X 1.5 bolts.
Part #: 35-0064
USD$40.65 Kit
Safety Wire Nut & Metric+Imperial Bolt Drill Jig Kit
Safety Wire Nut & Metric+Imperial Bolt Drill Jig Kit. Contains one nut drill jig, one metric bolt jig and one imperial bolt jig. Jig set designed for accurate drilling of nuts and bolts for use with safety lock wire. Both jigs can be mounted in a vice for drilling. The nut drill jig allows the safety wire holes to be drilled through the head of bolts or through nuts, across the diagonal easily. Accepts up to a 3.5mm diameter.
Metric bolt drill jig provides 6 drill holes for metric sizes 6 X 1.0, 8 X 1.0, 8 X 1.25, 10 X 1.25, 10 X 1.5 and 12 X 1.5 bolts.
Imperial bolt drill jig provides 6 drill holes for imperial sizes 1/4"-20, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24 and 7/16"-14 bolts.
Part #: 35-0065
Metric bolt drill jig provides 6 drill holes for metric sizes 6 X 1.0, 8 X 1.0, 8 X 1.25, 10 X 1.25, 10 X 1.5 and 12 X 1.5 bolts.
Imperial bolt drill jig provides 6 drill holes for imperial sizes 1/4"-20, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24 and 7/16"-14 bolts.
Part #: 35-0065
USD$20.70 ea
Safety Wire Pliers
Out of Stock
Email Me When Available

Safety Wire Pliers with return spring mechanism for easy wire twisting.
Part #: 35-0122
Part #: 35-0122
USD$5.15 ea
Safety Wire
25 Foot Roll of .032" Diameter Stainless Steel Safety Wire.
Part #: 35-0087
Part #: 35-0087