M.A.C. 4 into 2 Megaphone Complete Exhaust systems have centerstand retention, access to all service points, removable all steel baffles and a high quality chrome finish.

Chrome 4-2 - Fits: Honda CB750K (1969-76)
Part #: 001-1309

8 pc. Engine Oil Seal Kit, Superior OEM Quality - Made in Japan

Fits: Honda CB750K (1969-76)
CB750F (1975-76)
CB750K/F (1977-78) (with use of the 2nd countershaft seal in the kit).

1 pc. 91205-300-005 Countershaft sprocket oil seal 25 x 62 x 8 (For CB750K 71-76 & CB750F 75-76)
1 pc. 91205-405-005/000 Countershaft sprocket oil seal (2nd in the kit) - 29.8 x 62 x 7 (For CB750K 77-78 & CB750F 77-78)
1 pc. 91202-216-000/91202-302-010 Clutch arm seal - SB type - 14 x 24 x 5
1 pc. 91206-286-005/013/003 Shift shaft seal - 14 x 28x 7
1 pc. 91201-300-003 Crank seal 30 x 42 x 8
1 pc. 91215-300-003 Seal - Starting clutch gear - 25 x 33 x 4
1 pc. 91204-286-003/005 Kickstart Oil Seal 18 x 29 x 7
1 pc. 91211-286-003 Tach drive oil seal 4.8 x 14.5 x 4
Part #: 01-9018

Gran Tourisimo style Cushion Grip Set - Black - for 7/8" bars.

130mm Length
Part #: 02-2421

Horn Button with Spring

Fits: All Honda CB750's (1969-78)

Note: May also be used as a starter button
Part #: 12-0036

Bar Switch Assembly ~ Left (Clutch) Side - Black.

Replaces OEM#35200-374-671, 35200-390-671.

Note: Wiring to be run Inside the handlebar.

Fits: Honda CB750K (1973-76),
CB750F (1975-76) Supersport

Product Instructions

Part #: 12-0300

Bar Switch Assembly ~ Right (Brake) Side - Black.

Replaces OEM#35300-341-671.

Note: Wiring to be run Outside the handlebar.

Fits: Honda CB750K (1973-75)

PLUS- Also, fits the models below but the original switches for these bikes below did not include the OFF/ON switch on the side like this switch does.

Fits: Honda CB750K (1976),
CB750F (1975-76)

Product Instructions

Part #: 12-0301

Bar Switch Assembly ~ Right (Brake) Side - Black.

Replaces OEM#35130-404-671.

Note: Wiring to be run Outside the handlebar.

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport

Product Instructions

Part #: 12-0302

Bar Switch Assembly ~ Right (Brake) Side - Black.

Replaces OEM#35300-323-671.
Note: Wiring to be run Inside the handlebar.

Fits: Honda CB750K (1971-72)

Product Instructions

Part #: 12-0304

Bar Switch Assembly ~ Right (Brake) Side - Black.

Replaces OEM#35300-300-672.
Note: Wiring to be run Inside the handlebar.

Fits: Honda CB750K (1969-70)

Product Instructions

Part #: 12-0305

Bar Switch Assembly ~ Left (Clutch) Side - Black.

Replaces OEM#35250-300-033.
Note: Wiring to be run Outside the handlebar.

Fits: Honda CB750K (1969-71)

Product Instructions

Part #: 12-0306

Bar Switch Assembly ~ Left (Clutch) Side - Black.

Replaces OEM#35250-341-672.
Note: Wiring to be run Inside the handlebar.

Fits: Honda CB750K (1972)

Product Instructions

Part #: 12-0307

Bar Switch Assembly ~ Left (Clutch) Side - Black.

Replaces OEM#35200-404-671.
Note: Wiring to be run Inside the handlebar.

Fits: Honda CB750K (1977-78)

Note: This handlebar switch assembly requires the wires to be run inside the handlebar

Product Instructions

Part #: 12-0308

Bar Switch Assembly ~ Left (Clutch) Side - Black.

Replaces OEM#35200-410-671.
Note: Wiring to be run Inside the handlebar.

Fits: Honda CB750F (1977-78) Supersport

Product Instructions

Part #: 12-0310

Stock type Oil Filter Element (Paper Filter) - OEM Ref. # 15410-426-010, 15410-422-004

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic

Note: If you require new oil filter o-rings, springs or washers with these they are sold below
Part #: 15-0002

Spoke Set with nipples - 40 pc. Bright Cadium Plated Steel. Note: Both Spokes and Nipples are Silver in Color.

Fits: 19" Stock Front Wheel on - Honda CB750K (1970-78),
CB750F (1975-76) Supersport
Part #: 19-7501

Spoke Set with nipples - 40 pc. Bright Cadium Plated Steel. Note: Both Spokes and Nipples are Silver in Color.

Fits: Stock 18" Rear Wheel on - Honda CB750K (1969-76)
Part #: 19-7502

Carb Float with Pin, Replaces OEM# 16013-300-004.

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport

Note: 4 Carb Floats Used Per Bike, Order Quantity you Require.
For Easy Setting of these Floats Check out our Float Setting Tool Above.
Part #: 20-6505

Carb Float with Pin, Replaces OEM# 16013-405-004, 16013-393-004.

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic

Note: 4 Carb Floats Used Per Bike, Order Quantity you Require
Part #: 20-6509

Carb Pump Diaphragm for Keihin Carbs - Replaces OEM #'s 16021-393-004, 16021-393-014, 16021-MC9-771
Kits contain: 1 Diaphragm with Rod and 1 Bellow Rubber

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 20-9040

Starter Relay - OEM Ref. #35850-375-000, 35850-286-027

Fits: All Honda CB750's (1969-78)
Part #: 24-2003

Front Brake Caliper Piston Sealing Ring, Replaces OEM# 45108-300-003.

Fits: Honda CB750K (1969-76),
CB750F (1977-78) Supersport

+REAR Brake Caliper on CB750F (1975-78) Supersport
Part #: 29-0527

Front Brake Caliper Piston Sealing Ring, Replaces OEM# 45215-533-004.

Fits: Honda CB750K (1977-78),
CB750F (1975-76) Supersport,
CB750A (1976-78) Hondamatic
Part #: 29-0529

Mini Horn, 12 Volt, 2 3/4" Diameter, 100 Decibel.
Part #: 32-7509

Right Angled Snap Ring Plier Set - Reaches in deep to remove clips when rebuilding master cylinders.
Part #: 35-0009

"Tuck Away" 18mm Spark Plug Wrench. Works on 18mm Spark Plugs, 160mm overall, thinwall design allows fit into the deep CB plug holes. Handle Tucks away into socket.

Fits: 18mm Spark Plugs,
All Honda CB750's (1969-78)
Part #: 35-0078

Snap Ring Plier Set (4pc) - Removes internal and external snap rings. Includes 2 straight and 2 angled tips.
Part #: 35-0114

Ring Wrench to adjust shock preload.

Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-5033

Inductive Xenon Timing Light. Operates from 12 Volt Battery Power. The only accurate way to set your CB's Timing and check the operation of the advance.
Part #: 35-9000

Professional Flexible Fiber Optic Image Scope for inspecting
engine internal parts. 18" long wand with a 6mm (1/4") OD tip.
Image resolution is 7,400 pixels. Packed in a blow mold case
with handle jacket and extra Xenon Bulbs and 2 AA batteries.
Part #: 35-9096

Rotor and Sprocket Holder. Keeps rotors, flywheels and sprockets from rotating during removal and installation. The adjustable stop-screw keeps the tool open at a set distance. Holds sprockets and rotors with holes center to center at a minimum distance of 13mm and a maximum distance of 230mm's.
Part #: 35-9121

Carburetor Cleaning Tool Set. Includes 12 steel wire ends and a small file designed for cleaning nozzles and the tiny holes found in carburetor passages and jets.
Part #: 35-9125

Rear Spoke Set with Nipples - 40 Spokes with 40 Nipples. Note: Spokes are Silver in Color and Nipples are Gold in Color.

Fits: Stock 18" Rear Wheel on Honda CB750F (1975-76) Supersport
Part #: 73-0144

Rear Spoke Set with Nipples - 40 Spokes with 40 Nipples. Note: Spokes are Silver in Color and Nipples are Gold in Color.

Fits: 17" Stock Rear Wheel on Honda CB750K (1977-78)
Part #: 73-0145

Front Spoke Set with Nipples and O-Rings - 40 Spokes with 40 Nipples and 40 Metal O-Rings. Note: Both Spokes and Nipples are Silver in Color.

Fits: Stock 19" Front Wheel on - Honda CB750A (1976-77) Hondamatic
Part #: 73-0174

Rear Spoke Set with Nipples and O-Rings - 40 Spokes with 40 Nipples and 40 Metal O-Rings. Note: Both Spokes and Nipples are Silver in Color.

Fits: Stock 17" Rear Wheel on - Honda CB750A (1976-77) Hondamatic
Part #: 73-0175

Rear Brake Rod Assembly, Includes Brake Rod, Spring, Brake Arm Joint, Brake Rod Adjusting Nut, Brake Rod Joint Pin and Cotter Pin.

Fits: Honda CB750K (1969-78)
Part #: 73-0182

Bronze Thrust Bushing Set/2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set of brand-new bronze thrust bushings. Replaces OEM#52109-283-300.

Fits: Honda CB750K (1969-75)
Part #: 73-0883