Hide Categories

Series 1: Tools, Hardware & Accessories

USD$79.95 ea

CB750 Engine Stand

CB750 SOHC Engine Rebuild Stand. Make your engine rebuild a lot easier with this engine stand. Very rigid and easily secured to your work bench using holes found in the base of the stand. Powder coated gloss black for a durable finish.

High Quality, Made in the USA.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-1162
USD$44.95 ea

Portable Auxiliary Fuel Tank Tool

Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed.

Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.

Part #: 35-9120
USD$18.95 ea

Stud Extractor 1-6mm

Stud Extractor 1/4" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench.

Fits studs from (1-6mm)
Part #: 35-0102
USD$23.95 ea

Stud Extractor 6-12mm

Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench.

Fits studs from (6-12mm)
Part #: 35-0103
USD$12.95 Set

Cylinder Stud Installation Tool Set

3 Piece Cylinder Stud Installation Tool Set. Installs studs without damaging the threads. Steel construction with black oxide finish for longer tool life.

Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.
Part #: 35-0101
USD$69.95 Set

Compression Tester Set

Cylinder Compression Tester set with quick coupling & release valve. Includes adapters to fit 10mm, 12mm, 14mm, & 18mm Spark plug holes.
Part #: 35-9030
USD$54.95 ea

Econo Compression Tester

Cylinder compression Tester with quick coupling, universal adapter and flex hose with 14mm threaded end.
Part #: 35-9031
USD$98.00 ea

Leakdown Tester

Dual Gauge Leakdown Tester. Complete With 25" hose with Stepped adaptor.
One Dial Gauge Reads 0-100PSI, Other Reads 0-100 Percent.
Part #: 35-1377
USD$59.95 Kit

Valve Spring Compressor Kit

Valve Spring Compressor Kit in a Plastic Storage Case. Includes adapter sizes 16mm, 19mm, 23mm, 25mm and 30mm.
Part #: 35-0115
USD$12.00 ea

Valve Shim Tool for Honda's

Valve Shim Tool for Honda's. Designed to adjust valve clearance. It can hold the valve spring bucket down while removing the adjusting shims.
Part #: 35-1041
USD$4.00 ea

Valve Lapping Stick

Valve Lapping Stick 1 1/8" & 1 3/8" Diameter Ends, Suction Cup ends. Holds valve face so valve seat can be seated correctly with lapping paste.
Part #: 35-0057
USD$4.00 ea

Valve Lapping Stick

Valve Lapping Stick - 5/8" & 13/16" Diameter Ends, Suction Cup ends. Holds valve face so valve seat can be seated correctly with lapping paste.
Part #: 35-0058
USD$7.50 ea

Valve Lapping Stick Set

Valve Lapping Stick Set/2. One stick has 5/8" & 13/16" diameter cup ends, the other has 1 1/8" & 1 3/8" diameter cup ends. Holds valve face so valve seat can be seated correctly with lapping paste.
Part #: 35-0059
USD$9.95 ea

Gasket Scraper

15mm wide (9/16") Stainless Steel Gasket Scraper Knife.
Part #: 35-8002
USD$10.95 ea

Gasket Scraper

20mm wide (.79") Stainless Steel Gasket Scraper Knife.
Part #: 35-8003
USD$10.95 ea

Gasket Scraper

Out of Stock
Email Me When Available
Gasket Scraper
30mm wide (1.18") Stainless Steel Gasket Scraper Knife.
Part #: 35-8004
USD$19.95 Set

4 Piece Tappet Adjusting Tool Set

Tappet Adjusting Tool Set

4 Piece Set- for both 9 and 10mm valve adjuster screw locknuts. Screwdriver tip and 4mm square tip for valve adjuster screws.
Part #: 35-0042
USD$23.95 Set

6 Piece Tappet Adjusting Tool Set

Tappet Adjusting Tool Set

6 Piece Set- for both 8,9 and 10mm valve adjuster screw locknuts. Slotted Screw tip, 3mm and 4mm square tip for valve adjuster screws.
Part #: 35-4200
USD$89.95 ea

Image Scope

SALE: 89.95 (Regularly: 119.95)

Professional Flexible Fiber Optic Image Scope for inspecting
engine internal parts. 18" long wand with a 6mm (1/4") OD tip.
Image resolution is 7,400 pixels. Packed in a blow mold case
with handle jacket and extra Xenon Bulbs and 2 AA batteries.
Part #: 35-9096
USD$19.95 ea

Aluminum Timing Degree Wheel

Aluminum Timing Degree Wheel

7" Diameter with Large Visible Markings. This Tool Allows for Extremely Accurate Marking which Makes Getting the Timing Right the First Time a Breeze! Lightweight and Durable Tool.

This Tool Can be used for Crankshaft Positioning, Ignition and Camshaft Timing.
Part #: 35-9126
USD$44.95 ea

Timing Light

Inductive Xenon Timing Light. Operates from 12 Volt Battery Power. The only accurate way to set your CB's Timing and check the operation of the advance.
Part #: 35-9000
USD$84.95 Set

Precision Angle Driver Set

Precision Angle driver set (in carrying case) with assorted tips.
A must for setting hidden fuel mixture screws accurately and quickly.
A high quality tool.
Part #: 35-0096
USD$9.95 ea

Round Magnetic Parts Dish

Round Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 149mm Diameter, 40mm Height.
Part #: 35-0097
USD$16.95 ea

Rectangular Magnetic Parts Dish

Rectangular Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 9.5" Length, 5.5" Width, 1.1" Height.
Part #: 35-0098
USD$11.95 ea

Three Bond Thread Lock

Three Bond Thread Lock - 0.34 Oz, 10ml. Low Strength, Removeable, Frequent Repair Type.

Perfect for adding an extra hold to small screws and bolts which are frequently removed. Adds an extra hold of 10-20% greater then that of basic tightening. Blue in color.
Part #: 05-0005
USD$7.95 Set

9 pc. Feeler Gauge Set

Feeler Gauge Set With 45 Degree Ends- Metric Feeler Gauge Set for setting valve clearances.
9pc. Set (marked in metric sizes only).
0.229mm. - (.009")
0.381mm. - (.015")
0.406mm. - (.016")
0.432mm. - (.017")
0.457mm. - (.018")
0.483mm. - (.019")
0.508mm. - (.020")
0.533mm. - (.021")
0.660mm. - (.026")
Part #: 35-1766
USD$9.00 Set

Feeler Gauge Set

Feeler gauge set with 45 degree ends.
Includes Sizes - .008", .010", .012", .013", .014", .015", .016", 018", .019", .020", .025", .026"
Marked in Metric and Inch sizes.
Part #: 35-1767
USD$9.95 Set

20pc Feeler Gauge Set

Feeler Gauge Set - Metric Feeler Gauge Set for setting valve and contact point clearances. 20pc Set (marked in metric sizes only).
0.05mm. - (.002") 0.55mm. - (0.22")
0.10mm. - (.004") 0.60mm. - (0.24")
0.15mm. - (.006") 0.65mm. - (0.26")
0.20mm. - (.008") 0.70mm. - (0.28")
0.25mm. - (.010") 0.75mm. - (0.30")
0.30mm. - (.012") 0.80mm. - (0.32")
0.35mm. - (.014") 0.85mm. - (0.34")
0.40mm. - (.016") 0.90mm. - (0.36")
0.45mm. - (.018") 0.95mm. - (0.38")
0.50mm. - (0.20") 1.00mm. - (0.40")
Part #: 35-1768
USD$14.95 Set

31 pc Feeler Gauge Set

Feeler Gauge Set - Metric/Inch Feeler Gauge Set for setting valve and contact point clearances. 31pc Set (marked in metric and inch sizes).
0.04mm. - (.0015") 0.05mm. - (.002") 0.06mm. - (.0025")
0.08mm. - (.003") 0.10mm. - (.004") 0.13mm. - (.005")
0.15mm. - (.006") 0.20mm. - (.008") 0.23mm. - (.009")
0.25mm. - (.010") 0.28mm. - (.011") 0.30mm. - (.012")
0.33mm. - (.013") 0.35mm. - (.014") 0.38mm. - (.015")
0.40mm. - (.016") 0.43mm. - (.017") 0.45mm. - (.018")
0.48mm. - (.019") 0.50mm. - (.020") 0.53mm. - (.021")
0.55mm. - (.022") 0.58mm. - (.023") 0.63mm. - (.025")
0.65mm. - (.026") 0.70mm. - (.028") 0.75mm. - (.030")
0.80mm. - (.032")
Part #: 35-1769
USD$9.95 ea

Graduated Cylinder

250 ml Graduated Cylinder

250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids.
Part #: 35-2210
USD$11.95 ea.

Graduated Cylinder

Out of Stock
Email Me When Available
Graduated Cylinder
500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oils and other fluids.
Part #: 35-2211
USD$12.95 ea

Graduated Cylinder

1,000cc (1 Liter) plastic Graduated Cylinder for accurate measuring of fluids.

1 US Quart = 946cc (946ml.)
Part #: 35-2212
USD$13.95 ea

Stethoscope

Stethoscope with probe extension piece.
Part #: 35-9028
USD$57.95 Kit

Cam Chain Breaker/Riveter Tool Kit for Conventional Cam Chain

Cam Chain Tool Kit in case - a "must have" tool to Break and Rivet cam chains.

Note: Do Not use for rear drive chains.
Part #: 35-0112
USD$6.95 ea

Replacement Rivet Pin

Drive Chain Rivet Tool Replacement Rivet Pin

Fits: 35-0006 (Above)
Part #: 35-0007
USD$6.00 ea

Replacement Breaker Pin

Replacement Breaker Pin for Kit #35-0112 Breaker Tool.

Replacement Breaker Pin for Cam Chain Breaker Tool.
Part #: 35-0117
USD$49.95 Set/2

Chain Adjuster Stopper Set/2

Chain Adjuster Stopper Set/2. High quality made in Canada stainless steel stoppers. These have been discontinued by Honda get these stainless steel upgrades today! Replaces OEM# 52136-405-000 and 52136-ME1-670.

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1977-78) Hondamatic
Part #: 12-0101
USD$31.95 ea

Drive Chain Breaker Tool

Drive Chain Breaker Tool.

Breaks 520/530 and 630 Pitch Chain.
Part #: 35-0083
USD$22.95 ea

Drive Chain Breaker Tool

Drive Chain Breaker Tool. Folding Handle & Heat Treated Pin.

Breaks 420/520 and 530 Pitch Chain
Part #: 35-9100
USD$14.95 ea

Chain Puller Tool

Chain Puller Tool, Pulls new rear drive chain ends together so that the joiner link can be slipped in place. Ideal for new chains that are difficult to get together for the first time.
Part #: 35-0130
USD$6.95 ea

Chain Press Tool

Chain Press Tool Used to press on sideplates (rivet or clip type) onto rear drive chains.

Most late type High strength drive chains now use a press on sideplate
on the connecting link (including IZUMI 530 HT).
Part #: 35-0081
USD$14.95 ea

Chain Alignment Tool

Chain Alignment Tool. This tool provides an easy way to verify your chain is aligned properly to the front and rear sprockets after rear wheel or chain maintenance.

Simply clamp this tool on the rear sprocket with the rod pointing to the front sprocket. With the rod as your guide, make visual alignment then adjust the chain adjusters as needed to correct alignment.
Part #: 35-0071
USD$49.95 ea

Chain Rivet Tool - Hollow Chain Pin Riveter

Drive Chain Riveter Tool - Rivets high strength rear drive chain Rivet links with hollow pin ends as on our IZUMI 530HT Chain (Rivet link #56-0235) and many DID brand chains.
Part #: 35-0006
USD$19.95 ea

Chain Clip Link Remover Pliers

Chain Clip Link Remover Pliers. Slim jaw design allows for easy install and removal of chain clip links.
Part #: 35-0050
USD$11.95 ea

Brush Cleaning Tool

Blue Chain Cleaning Brush/ Gear Cleaner Tool.
Part #: 35-0055
USD$21.95 ea

Clutch & Sprocket Holder Tool

Clutch & Sprocket Holder Tool

Professional adjustable vise grip style clutch basket and sprocket holder tool.
Part #: 35-9052
USD$17.95 ea

Clutch Center Nut Removal Tool ~ Premium

Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 and 24.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 35-0076
USD$9.95 ea

Clutch Center Nut Removal Tool

Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 35-0051
USD$26.95 ea

Rotor and Sprocket Holder

Rotor and Sprocket Holder. Keeps rotors, flywheels and sprockets from rotating during removal and installation. The adjustable stop-screw keeps the tool open at a set distance. Holds sprockets and rotors with holes center to center at a minimum distance of 13mm and a maximum distance of 230mm's.
Part #: 35-9121
USD$9.95 ea

Alternator Rotor Puller

Alternator Rotor Puller - 20mm x M1.5 Right Hand Thread Puller for pulling internal thread rotors.

Pulls Alternator Rotors on All Honda CB750's (1969-78)
Part #: 35-0030
USD$24.95 ea

Piston Pin Puller

Out of Stock
Email Me When Available
Piston Pin Puller
Piston Pin Puller
Fits Piston Sizes from 40mm (1 5/8") to 100mm (4") and Piston Pins From 12mm to 17mm

Tool has 2 threaded steps 12mm and 17mm. Diameter of the rod that goes through the piston pin is 8.5mm..
Part #: 35-0090
USD$54.95 ea

Steering Bearing Installation Tool

Steering Bearing Installation Tool. Includes one driver and three aluminum adapters. Unique system utilizes specially designed aluminum adaptors to quickly and accurately install nearly any lower bearing. Use with a soft faced hammer.
Part #: 35-0073
USD$29.95 ea

Steering Race Remover 35-55mm

Steering Head Bearing Race Remover, Range 35-55mm ID.

This tool will assist in removing motorcycle steering head bearing races. The size range is from 35mm to 55mm inside diameter. Can be driven with any hammer or mallet. Slips in the headtube solid end first until it snaps in behind the bearing race, then simply drive the race out of the frame.
Part #: 35-9124
USD$27.95 ea

Bearing Packer

Wheel Bearing Grease Packer. To pack a bearing, place the bearing on the piston, press down on the cap until the old grease is forced out and the new grease shows on top of the bearing. Grease stays in the tool cavity, not on your hands. Transparent, impact resistant cup allows easy grease level checks. Works on bearings up to 3-1/2" OD or 89mm.
Part #: 35-9122
USD$13.95 ea

Deluxe Shock Preload Adjusting Tool

Deluxe Shock Preload Adjusting Tool. This tool helps to adjust shock preload without damaging the shock spring collars. It fits 35mm to 75mm spring collars.

Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-9108
USD$3.95 ea

Shock Preload Adjusting Tool

Out of Stock
Email Me When Available
Shock Preload Adjusting Tool
Ring Wrench to adjust shock preload.

Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-5033
USD$7.95 ea

Fork Cap Wrench ~24MM Size

Fork Cap Wrench ~ 24MM Size. This is a non-marring fork cap wrench that fits all motorcycles with 24MM fork caps. This wrench will allow you to remove your fork caps without worrying about damaging them.

Removes Stock 24mm Size Fork Caps on the models below
CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-9116
USD$39.95 ea

35/36mm Fork Seal Drive

35/36mm High quality carbon steel fork seal driver with split design. Use this for easy installation of 35 or 36mm fork seals on either conventional or inverted forks.

35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-4299
USD$54.95 ea

Adjustable Fork Seal Driver 35-45mm

Adjustable 35-45mm Fork Seal Driver. This high quality tool can be used on many different fork sizes. Use these for easy installation of most fork seals on either conventional or inverted forks.

35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-3041
USD$249.95 Set

Deluxe Fork Seal Driver Set

Out of Stock
Email Me When Available
Deluxe Fork Seal Driver Set
Deluxe Fork Seal Driver Set. This set includes 9 high quality carbon steel fork seal drivers with split design. Use these for easy installation of most fork seals on either conventional or inverted forks.

Set Contains plastic storage case and the following drivers.
-35/36mm driver
-39mm driver
-41mm driver
-43mm driver
-45mm driver
-46/47mm driver
-48mm driver
-49/50mm driver
-54mm driver
Part #: 35-9109
USD$10.95 ea

Oil Filter Wrench

3/8" Drive Tripod Oil Filter Wrench

Fits: Aftermarket Spin-On Cartridge Oil filters (our #15-1006) for All Honda CB750's (1969-78).
Part #: 35-9022
USD$23.95 ea

Fork Oil Level Gauge

Fork Oil Level Gauge for adjusting the oil level on all forks. Adjustable ring measures oil levels from 0-300mm in 50mm increments. 60ml capacity syringe adjusts fluid levels.
Part #: 35-1084
USD$14.95 Set

Snap Ring Plier Set

Snap Ring Plier Set (4pc) - Removes internal and external snap rings. Includes 2 straight and 2 angled tips.
Part #: 35-0114
USD$24.95 ea

Holding Tool

T-Handle Adjustable Holder for Pulleys, Flywheels, Hubs and other round smooth objects.
Part #: 35-0116
USD$14.95 ea

Seal Puller Tool

Seal Puller Tool, For Large Size Seals.
Part #: 35-8000
USD$14.95 ea

Metric Hook Wrench

Metric Hook Wrench, 60/65mm for Steering Head Adjustment.
Part #: 35-0005
USD$13.95 ea

Hose Remover Pliers

Hose Remover Pliers. For easy removal of 5/32" to 1/2" hoses. The jaw digs into the tube to grip it, squeeze and the hose is easily pushed off by the jaw.
Part #: 35-0049
USD$14.95 ea

Flexible Magnet Tool

Flexible Rod with magnetic tip. 23" Long, picks up to 3.5 Lbs.
Part #: 35-9036
USD$12.95 ea

Fluid Hose Clamp

Fluid Hose Clamp, all steel construction with adjustable locking collar. Completely or partially closes flexible brake, fuel, and vacuum fluid lines.
Part #: 35-9117
USD$15.95 ea

Strap Wrench

Strap Wrench with rubberized strap for improved grip. Ideal for holding fork tubes and other round smooth shapes.

Fits: 29-160mm. 1 1/8" - 6 1/4" diameter items
Part #: 35-9024
USD$11.95 ea

Flexible Metal Funnel

Metal Funnel with 14" detachable metal nozzle.
Part #: 35-8040
USD$24.95 ea

382pc O-Rings Kit with Plastic Case

382pc O-Rings Kit with Plastic Case. 30 different sizes included in mm's.

QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia.
20X---1.78mm--2.90mm------------13X---2.62mm--9.19mm
20X---1.78mm--3.69mm------------13X---2.62mm--10.77mm
20X---1.78mm--4.47mm------------13X---2.62mm--12.37mm
20X---1.78mm--5.29mm------------13X---2.62mm--13.95mm
20X---1.78mm--6.07mm------------13X---2.62mm--15.54mm
20X---1.78mm--7.65mm------------13X---2.62mm--17.12mm
20X---1.78mm--9.25mm------------13X---2.62mm--18.72mm

10X---3.53mm--18.64mm----------10X---3.53mm--31.34mm
10X---3.53mm--20.22mm----------10X---3.53mm--32.92mm
10X---3.53mm--21.82mm----------10X---3.53mm--34.52mm
10X---3.53mm--23.39mm----------10X---3.53mm--36.10mm
10X---3.53mm--25.00mm----------10X---3.53mm--37.70mm
10X---3.53mm--26.57mm------------7X---5.34mm--37.47mm
10X---3.53mm--28.17mm------------7X---5.34mm--40.65mm
10X---3.53mm--29.75mm------------7X---5.34mm--43.82mm
Part #: 35-0066
USD$29.95 ea

419pc O-Rings Kit with Plastic Case

419pc O-Rings Kit with Plastic Case. 32 different sizes included metric sizes.

QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia.
20X---1.50mm--3.00mm------------13X---2.50mm--11.00mm
23X---1.50mm--7.00mm------------14X---2.50mm--13.00mm
23X---1.50mm--10.0mm------------13X---2.50mm--14.00mm
23X---1.50mm--13.0mm------------14X---2.50mm--16.00mm
20X---2.00mm--4.40mm------------14X---2.50mm--18.00mm
18X---2.00mm--5.00mm------------13X---2.50mm--19.00mm
14X---2.50mm--10.0mm------------14X---2.50mm--21.00mm

13X---2.50mm--22.00mm----------10X---3.50mm--31.00mm
10X---3.50mm--18.00mm----------10X---3.50mm--33.00mm
10X---3.50mm--20.00mm----------10X---3.50mm--34.50mm
10X---3.50mm--22.00mm----------10X---3.50mm--36.00mm
10X---3.50mm--23.50mm----------10X---3.50mm--38.00mm
10X---3.50mm--25.00mm----------10X---3.50mm--41.00mm
10X---3.50mm--26.50mm----------10X---3.50mm--44.00mm
10X---3.50mm--28.00mm----------10X---3.50mm--47.00mm
10X---3.50mm--30.00mm----------10X---3.50mm--50.00mm
Part #: 35-0067