Series 1: Fuel System
- Carb Rebuild & Jetting
- Carb Floats & Other Carb Components
- Carb Holders, Air Box Rubber Boots, Clamps
- Gas Tanks, Caps, Petcocks & Parts
- Throttle/Choke Cables, Throttles & Sleeves
- Air Filters, Vent Filters
- Fuel Line & Fuel Filters
- Hose Clamps
- Carburetor Tools
USD$13.95 ea
Carb Float
SALE: 13.95
(Regularly: 17.70)
Carb Float with Pin, Replaces OEM # 16013-300-004
Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Note: 4 Carb Floats Used Per Bike, Order Quantity you Require.
For Easy Setting of these Floats Check out our Float Setting Tool Above.
Part #: 20-6505
USD$17.70 ea
Carb Float
Carb Float with Pin, Replaces OEM # 16013-405-004 / 16013-393-004 / 16013-KCY-670 / 16013-MN1-671.
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Note: 4 Carb Floats Used Per Bike, Order Quantity you Require
Part #: 20-6509
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Note: 4 Carb Floats Used Per Bike, Order Quantity you Require
Part #: 20-6509
USD$14.75 ea
Carb Float Setting Tool (1969-76 Models)
Carb Float Setting Tool. Use this tool to help set your floats with ease!
This pre-set float setting gauge is for the 1969-76K and 1975-76F Supersport models.
Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 20-6510
This pre-set float setting gauge is for the 1969-76K and 1975-76F Supersport models.
Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 20-6510
USD$14.75 ea
Carb Float Level Gauge
Carburetor Float Level Gauge. Used to measure the float height between the float and carburetor gasket surface. It is important to make sure the float height is correct to factory spec when tuning your engine. Too little or too much fuel in the float bowl will negatively affect tuning results. Adjustable to fit most carburetors.
Adjustable Width: 16-78mm and Adjustable Height 0-40mm
Part #: 35-0043
Adjustable Width: 16-78mm and Adjustable Height 0-40mm
Part #: 35-0043
USD$12.55 Kit
Carburetor Screw Kit
Carburetor Screw Kit. Get a new set of screws to clean up the look of your carbs!
Kit Includes:
4X - Drain Screws with O-Rings
1X - 4x8 Screws w Lock Washers
11X- 4x12 Screws w Lock Washers
12X- 4x16 Screws w Lock Washers
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport
Part #: 49-0772
Kit Includes:
4X - Drain Screws with O-Rings
1X - 4x8 Screws w Lock Washers
11X- 4x12 Screws w Lock Washers
12X- 4x16 Screws w Lock Washers
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport
Part #: 49-0772
USD$5.15 ea
Stock Type Float Bowl Drain Screw
Float Bowl Drain Screw w O-Ring.
Fits: Honda CB750K (1971-76),
CB750F (1975-76) Supersport
Note: We sell these each, order the quantity you require
Part #: 48-5041
Fits: Honda CB750K (1971-76),
CB750F (1975-76) Supersport
Note: We sell these each, order the quantity you require
Part #: 48-5041
USD$4.40 ea
Stock Type Float Bowl Drain Screw
Float Bowl Drain Screw w O-Ring.
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Note: Sold each, order the quantity you require
Part #: 48-5042
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Note: Sold each, order the quantity you require
Part #: 48-5042
USD$3.65 Pk/4
Float Bowl Drain Screw O-Rings Pk/4
Float Bowl Drain Screw O-Rings Pk/4
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 48-0792
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 48-0792
USD$3.65 Pk/4
Float Bowl Drain Screw O-Rings Pk/4
Float Bowl Drain Screw w O-Ring.
Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 48-0793
Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 48-0793
USD$1.10 ea
Air Screw Needle O-Ring
Out of Stock
Email Me When Available
Air Screw Needle O-Ring. 2.8mm x 1.2mm.
Fits: Honda CB750K (1971-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Note: sold each, order the quantity you require
Part #: 48-5043
Fits: Honda CB750K (1971-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Note: sold each, order the quantity you require
Part #: 48-5043
USD$17.00 Kit
Carb Bolt Kit
Carburetor Bolt and Washer 46 Piece Kit. This is a Complete Bolt Kit for All 4 Carburetors.
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-1043
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-1043
USD$5.15 ea
Carb Overflow Guide
Carb Overflow Guide, Replaces OEM # 11355-300-000
Fits: Honda CB750K (1971-78),
CB750F (1975-78) Supersport
Part #: 73-0951
Fits: Honda CB750K (1971-78),
CB750F (1975-78) Supersport
Part #: 73-0951
USD$4.05 ea
Carb Overflow Tube Hose
Carb Overflow Tube Hose. 24" Piece. 8mm Outer Diameter, 4mm Inner Diameter.
Sold Each, Order the quantity you require
Part #: 20-4008
Sold Each, Order the quantity you require
Part #: 20-4008
USD$6.60 ea
Throttle Adjusting Bolt
Throttle Adjusting Bolt, Replaces OEM # 53190-300-000
Fits: Honda CB750K (1971-74)
Part #: 73-0846
Fits: Honda CB750K (1971-74)
Part #: 73-0846
USD$6.60 ea
Throttle Adjusting Spring
Throttle Adjusting Spring, Replaces OEM # 53191-300-000
Fits: Honda CB750K (1971-74)
Part #: 73-0847
Fits: Honda CB750K (1971-74)
Part #: 73-0847
USD$2.20 ea
Accelerator Pump Joint Hose
Accelerator Pump Joint Hose. 12" Piece. 8mm Outer Diameter, 4mm Inner Diameter.
Order the quantity you require.
Note: Be sure to remove and then re-install the old brass nozzles from the old joint hoses.
Part #: 20-4007
Order the quantity you require.
Note: Be sure to remove and then re-install the old brass nozzles from the old joint hoses.
Part #: 20-4007
USD$7.35 Kit
Carb Fuel Line O-Ring Kit
Carb Fuel Line O-Ring 12Pc Kit
Includes: 8 Carb Fuel Connector Tube O-Rings and 4 Float Bowl Drain Seal
Connector Tube O-Rings (The 4 tubes that connect the 4 carbs together).
Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 48-0791
Includes: 8 Carb Fuel Connector Tube O-Rings and 4 Float Bowl Drain Seal
Connector Tube O-Rings (The 4 tubes that connect the 4 carbs together).
Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 48-0791
USD$17.70 ea
Carb Pump Diaphragm
Carb Pump Diaphragm for Keihin Carbs - Replaces OEM #'s 16021-393-004 / 16021-393-014 / 16021-MC9-771
Kits contain: 1 Diaphragm with Rod and 1 Bellow Rubber
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 20-9040
Kits contain: 1 Diaphragm with Rod and 1 Bellow Rubber
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 20-9040