Carb Float with Pin, Replaces OEM # 16013-405-004 / 16013-393-004 / 16013-KCY-670 / 16013-MN1-671.

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic

Note: 4 Carb Floats Used Per Bike, Order Quantity you Require
Part #: 20-6509

Carb Float Setting Tool. Use this tool to help set your floats with ease!

This pre-set float setting gauge is for the 1969-76K and 1975-76F Supersport models.

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 20-6510

Carburetor Float Level Gauge. Used to measure the float height between the float and carburetor gasket surface. It is important to make sure the float height is correct to factory spec when tuning your engine. Too little or too much fuel in the float bowl will negatively affect tuning results. Adjustable to fit most carburetors.

Adjustable Width: 16-78mm and Adjustable Height 0-40mm
Part #: 35-0043

Carburetor Screw Kit. Get a new set of screws to clean up the look of your carbs!

Kit Includes:
4X - Drain Screws with O-Rings
1X - 4x8 Screws w Lock Washers
11X- 4x12 Screws w Lock Washers
12X- 4x16 Screws w Lock Washers

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport
Part #: 49-0772

Float Bowl Drain Screw w O-Ring.

Fits: Honda CB750K (1971-76),
CB750F (1975-76) Supersport

Note: We sell these each, order the quantity you require
Part #: 48-5041

Float Bowl Drain Screw w O-Ring.

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic

Note: Sold each, order the quantity you require
Part #: 48-5042

Float Bowl Drain Screw O-Rings Pk/4

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 48-0792

Float Bowl Drain Screw w O-Ring.

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 48-0793

Air Screw Needle O-Ring. 2.8mm x 1.2mm.

Fits: Honda CB750K (1971-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic

Note: sold each, order the quantity you require
Part #: 48-5043

Carburetor Bolt and Washer 46 Piece Kit. This is a Complete Bolt Kit for All 4 Carburetors.

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-1043

Carb Overflow Guide, Replaces OEM # 11355-300-000

Fits: Honda CB750K (1971-78),
CB750F (1975-78) Supersport
Part #: 73-0951

Carb Overflow Tube Hose. 24" Piece. 8mm Outer Diameter, 4mm Inner Diameter.

Sold Each, Order the quantity you require
Part #: 20-4008

Throttle Adjusting Bolt, Replaces OEM # 53190-300-000

Fits: Honda CB750K (1971-74)
Part #: 73-0846

Throttle Adjusting Spring, Replaces OEM # 53191-300-000

Fits: Honda CB750K (1971-74)
Part #: 73-0847

Accelerator Pump Joint Hose. 12" Piece. 8mm Outer Diameter, 4mm Inner Diameter.

Order the quantity you require.

Note: Be sure to remove and then re-install the old brass nozzles from the old joint hoses.
Part #: 20-4007

Carb Fuel Line O-Ring 12Pc Kit

Includes: 8 Carb Fuel Connector Tube O-Rings and 4 Float Bowl Drain Seal
Connector Tube O-Rings (The 4 tubes that connect the 4 carbs together).

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 48-0791

Carb Pump Diaphragm for Keihin Carbs - Replaces OEM #'s 16021-393-004 / 16021-393-014 / 16021-MC9-771
Kits contain: 1 Diaphragm with Rod and 1 Bellow Rubber

Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 20-9040