Series 1: Tools, Hardware & Accessories
- Brake,Tire & Wheel Tools
- Carburetor Tools
- Electrical Tools
- Engine, Steering & Clutch Tools
- Miscellaneous Tools
- Service Manuals, Owners Manuals
- Fasteners & Hardware
- Cargo Nets, Tie Downs, Motorcycle Covers
- Rim, Helmet & Seat Locks
- VintageCB750 Apparel / Honda Merchandise
USD$66.55 ea
CB750 Engine Stand
CB750 SOHC Engine Rebuild Stand. Make your engine rebuild a lot easier with this engine stand. Very rigid and easily secured to your work bench using holes found in the base of the stand. Powder coated gloss black for a durable finish.
High Quality, Made in the USA.
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-1162
High Quality, Made in the USA.
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 73-1162
USD$36.95 ea
Portable Auxiliary Fuel Tank Tool
Portable Auxiliary Fuel Tank, for Non Fuel Injection Systems. Includes 4 Feet of 1/4" fuel line and an inline fuel valve with 1/4" inlet and outlet. Fuel capacity 2 Litres. For use when tuning a motorcycle with the gas tank removed.
Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.
Part #: 35-9120
Note: This tool is not to be used for long term fuel storage, for safety and to prevent accidental spillage, immediately drain gas back to approved long term storage container after use.
Part #: 35-9120
USD$14.00 ea
Stud Extractor 1-6mm
Out of Stock
Email Me When Available
Stud Extractor 1/4" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench.
Fits studs from (1-6mm)
Part #: 35-0102
Fits studs from (1-6mm)
Part #: 35-0102
USD$18.45 ea
Stud Extractor 6-12mm
Stud Extractor 3/8" Drive, used to remove seized or broken studs and bolts. Designed to fit into small areas, where studs may be hard to reach. Use with an impact wrench.
Fits studs from (6-12mm)
Part #: 35-0103
Fits studs from (6-12mm)
Part #: 35-0103
USD$9.60 Set
Cylinder Stud Installation Tool Set
3 Piece Cylinder Stud Installation Tool Set. Installs studs without damaging the threads. Steel construction with black oxide finish for longer tool life.
Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.
Part #: 35-0101
Includes M6 x 1.00, M8 x 1.25 and M10 x 1.25 stud installers. Hex head is 19mm.
Part #: 35-0101
USD$51.75 Set
Compression Tester Set
Cylinder Compression Tester set with quick coupling & release valve. Includes adapters to fit 10mm, 12mm, 14mm, & 18mm Spark plug holes.
Part #: 35-9030
Part #: 35-9030
USD$36.95 ea
Econo Compression Tester
Cylinder compression Tester with quick coupling, universal adapter and flex hose with 14mm threaded end.
Part #: 35-9031
Part #: 35-9031
USD$87.30 ea
Leakdown Tester
Dual Gauge Leakdown Tester. Complete With 25" hose with Stepped adaptor.
One Dial Gauge Reads 0-100PSI, Other Reads 0-100 Percent.
Part #: 35-1377
One Dial Gauge Reads 0-100PSI, Other Reads 0-100 Percent.
Part #: 35-1377
USD$36.95 Kit
Valve Spring Compressor Kit
Valve Spring Compressor Kit in a Plastic Storage Case. Includes adapter sizes 16mm, 19mm, 23mm, 25mm and 30mm.
Part #: 35-0115
Part #: 35-0115
USD$9.60 ea
Valve Shim Tool for Honda's
Valve Shim Tool for Honda's. Designed to adjust valve clearance. It can hold the valve spring bucket down while removing the adjusting shims.
Part #: 35-1041
Part #: 35-1041
USD$2.40 ea
Valve Lapping Stick
Valve Lapping Stick 1 1/8" & 1 3/8" Diameter Ends, Suction Cup ends. Holds valve face so valve seat can be seated correctly with lapping paste.
Part #: 35-0057
Part #: 35-0057
USD$2.40 ea
Valve Lapping Stick
Valve Lapping Stick - 5/8" & 13/16" Diameter Ends, Suction Cup ends. Holds valve face so valve seat can be seated correctly with lapping paste.
Part #: 35-0058
Part #: 35-0058
USD$4.65 ea
Valve Lapping Stick Set
Valve Lapping Stick Set/2. One stick has 5/8" & 13/16" diameter cup ends, the other has 1 1/8" & 1 3/8" diameter cup ends. Holds valve face so valve seat can be seated correctly with lapping paste.
Part #: 35-0059
Part #: 35-0059
USD$11.05 ea
Permatex Valve Lapping Paste
Out of Stock
Email Me When Available
Valve Lapping Paste - Permatex
Aids valve grinding and seating operations to remove burrs, surface defects, carbon and corrosion. Mixes with water to form an easy to use paste.
Part #: 35-0124
Aids valve grinding and seating operations to remove burrs, surface defects, carbon and corrosion. Mixes with water to form an easy to use paste.
Part #: 35-0124
USD$6.30 ea
Gasket Scraper
15mm wide (9/16") Stainless Steel Gasket Scraper Knife.
Part #: 35-8002
Part #: 35-8002
USD$6.30 ea
Gasket Scraper
20mm wide (.79") Stainless Steel Gasket Scraper Knife.
Part #: 35-8003
Part #: 35-8003
USD$13.30 Set
4 Piece Tappet Adjusting Tool Set
Out of Stock
Email Me When Available
Tappet Adjusting Tool Set
4 Piece Set- for both 9 and 10mm valve adjuster screw locknuts. Screwdriver tip and 4mm square tip for valve adjuster screws.
Part #: 35-0042
4 Piece Set- for both 9 and 10mm valve adjuster screw locknuts. Screwdriver tip and 4mm square tip for valve adjuster screws.
Part #: 35-0042
USD$22.15 Set
6 Piece Tappet Adjusting Tool Set
Tappet Adjusting Tool Set
6 Piece Set- for both 8,9 and 10mm valve adjuster screw locknuts. Slotted Screw tip, 3mm and 4mm square tip for valve adjuster screws.
Part #: 35-4200
6 Piece Set- for both 8,9 and 10mm valve adjuster screw locknuts. Slotted Screw tip, 3mm and 4mm square tip for valve adjuster screws.
Part #: 35-4200
USD$79.95 ea
Image Scope
SALE: 79.95
(Regularly: 102.85)
Professional Flexible Fiber Optic Image Scope for inspecting
engine internal parts. 18" long wand with a 6mm (1/4") OD tip.
Image resolution is 7,400 pixels. Packed in a blow mold case
with handle jacket and extra Xenon Bulbs and 2 AA batteries.
Part #: 35-9096
USD$19.95 ea
Aluminum Timing Degree Wheel
Aluminum Timing Degree Wheel
7" Diameter with Large Visible Markings. This Tool Allows for Extremely Accurate Marking which Makes Getting the Timing Right the First Time a Breeze! Lightweight and Durable Tool.
This Tool Can be used for Crankshaft Positioning, Ignition and Camshaft Timing.
Part #: 35-9126
7" Diameter with Large Visible Markings. This Tool Allows for Extremely Accurate Marking which Makes Getting the Timing Right the First Time a Breeze! Lightweight and Durable Tool.
This Tool Can be used for Crankshaft Positioning, Ignition and Camshaft Timing.
Part #: 35-9126
USD$31.80 ea
Timing Light
Inductive Xenon Timing Light. Operates from 12 Volt Battery Power. The only accurate way to set your CB's Timing and check the operation of the advance.
Part #: 35-9000
Part #: 35-9000
USD$56.95 Set
Precision Angle Driver Set
Precision Angle driver set (in carrying case) with assorted tips.
A must for setting hidden fuel mixture screws accurately and quickly.
A high quality tool.
Part #: 35-0096
A must for setting hidden fuel mixture screws accurately and quickly.
A high quality tool.
Part #: 35-0096
USD$7.35 ea
Round Magnetic Parts Dish
Round Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 149mm Diameter, 40mm Height.
Part #: 35-0097
Part #: 35-0097
USD$11.05 ea
Rectangular Magnetic Parts Dish
Rectangular Stainless Steel Magnetic Parts Dish. Very useful when working with small screws, hardware and parts. 9.5" Length, 5.5" Width, 1.1" Height.
Part #: 35-0098
Part #: 35-0098
USD$11.80 ea
Three Bond Thread Lock
Three Bond Thread Lock - 0.34 Oz, 10ml. Low Strength, Removeable, Frequent Repair Type.
Perfect for adding an extra hold to small screws and bolts which are frequently removed. Adds an extra hold of 10-20% greater then that of basic tightening. Blue in color.
Part #: 05-0005
Perfect for adding an extra hold to small screws and bolts which are frequently removed. Adds an extra hold of 10-20% greater then that of basic tightening. Blue in color.
Part #: 05-0005
USD$3.65 Set
9 pc. Feeler Gauge Set
Out of Stock
Email Me When Available
Feeler Gauge Set With 45 Degree Ends- Metric Feeler Gauge Set for setting valve clearances.
9pc. Set (marked in metric sizes only).
0.229mm. - (.009")
0.381mm. - (.015")
0.406mm. - (.016")
0.432mm. - (.017")
0.457mm. - (.018")
0.483mm. - (.019")
0.508mm. - (.020")
0.533mm. - (.021")
0.660mm. - (.026")
Part #: 35-1766
9pc. Set (marked in metric sizes only).
0.229mm. - (.009")
0.381mm. - (.015")
0.406mm. - (.016")
0.432mm. - (.017")
0.457mm. - (.018")
0.483mm. - (.019")
0.508mm. - (.020")
0.533mm. - (.021")
0.660mm. - (.026")
Part #: 35-1766
USD$5.55 Set
Feeler Gauge Set
Feeler gauge set with 45 degree ends.
Includes Sizes - .008", .010", .012", .013", .014", .015", .016", 018", .019", .020", .025", .026"
Marked in Metric and Inch sizes.
Part #: 35-1767
Includes Sizes - .008", .010", .012", .013", .014", .015", .016", 018", .019", .020", .025", .026"
Marked in Metric and Inch sizes.
Part #: 35-1767
USD$7.05 Set
20pc Feeler Gauge Set
Feeler Gauge Set - Metric Feeler Gauge Set for setting valve and contact point clearances. 20pc Set (marked in metric sizes only).
0.05mm. - (.002") 0.55mm. - (0.22")
0.10mm. - (.004") 0.60mm. - (0.24")
0.15mm. - (.006") 0.65mm. - (0.26")
0.20mm. - (.008") 0.70mm. - (0.28")
0.25mm. - (.010") 0.75mm. - (0.30")
0.30mm. - (.012") 0.80mm. - (0.32")
0.35mm. - (.014") 0.85mm. - (0.34")
0.40mm. - (.016") 0.90mm. - (0.36")
0.45mm. - (.018") 0.95mm. - (0.38")
0.50mm. - (0.20") 1.00mm. - (0.40")
Part #: 35-1768
0.05mm. - (.002") 0.55mm. - (0.22")
0.10mm. - (.004") 0.60mm. - (0.24")
0.15mm. - (.006") 0.65mm. - (0.26")
0.20mm. - (.008") 0.70mm. - (0.28")
0.25mm. - (.010") 0.75mm. - (0.30")
0.30mm. - (.012") 0.80mm. - (0.32")
0.35mm. - (.014") 0.85mm. - (0.34")
0.40mm. - (.016") 0.90mm. - (0.36")
0.45mm. - (.018") 0.95mm. - (0.38")
0.50mm. - (0.20") 1.00mm. - (0.40")
Part #: 35-1768
USD$11.05 Set
31 pc Feeler Gauge Set
Feeler Gauge Set - Metric/Inch Feeler Gauge Set for setting valve and contact point clearances. 31pc Set (marked in metric and inch sizes).
0.04mm. - (.0015") 0.05mm. - (.002") 0.06mm. - (.0025")
0.08mm. - (.003") 0.10mm. - (.004") 0.13mm. - (.005")
0.15mm. - (.006") 0.20mm. - (.008") 0.23mm. - (.009")
0.25mm. - (.010") 0.28mm. - (.011") 0.30mm. - (.012")
0.33mm. - (.013") 0.35mm. - (.014") 0.38mm. - (.015")
0.40mm. - (.016") 0.43mm. - (.017") 0.45mm. - (.018")
0.48mm. - (.019") 0.50mm. - (.020") 0.53mm. - (.021")
0.55mm. - (.022") 0.58mm. - (.023") 0.63mm. - (.025")
0.65mm. - (.026") 0.70mm. - (.028") 0.75mm. - (.030")
0.80mm. - (.032")
Part #: 35-1769
0.04mm. - (.0015") 0.05mm. - (.002") 0.06mm. - (.0025")
0.08mm. - (.003") 0.10mm. - (.004") 0.13mm. - (.005")
0.15mm. - (.006") 0.20mm. - (.008") 0.23mm. - (.009")
0.25mm. - (.010") 0.28mm. - (.011") 0.30mm. - (.012")
0.33mm. - (.013") 0.35mm. - (.014") 0.38mm. - (.015")
0.40mm. - (.016") 0.43mm. - (.017") 0.45mm. - (.018")
0.48mm. - (.019") 0.50mm. - (.020") 0.53mm. - (.021")
0.55mm. - (.022") 0.58mm. - (.023") 0.63mm. - (.025")
0.65mm. - (.026") 0.70mm. - (.028") 0.75mm. - (.030")
0.80mm. - (.032")
Part #: 35-1769
USD$6.60 ea
Graduated Cylinder
250 ml Graduated Cylinder
250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids.
Part #: 35-2210
250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids.
Part #: 35-2210
USD$7.35 ea.
Graduated Cylinder
Out of Stock
Email Me When Available
500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oils and other fluids.
Part #: 35-2211
Part #: 35-2211
USD$8.10 ea
Graduated Cylinder
1,000cc (1 Liter) plastic Graduated Cylinder for accurate measuring of fluids.
1 US Quart = 946cc (946ml.)
Part #: 35-2212
1 US Quart = 946cc (946ml.)
Part #: 35-2212
USD$51.75 Kit
Cam Chain Breaker/Riveter Tool Kit for Conventional Cam Chain
Out of Stock
Email Me When Available
Cam Chain Tool Kit in case - a "must have" tool to Break and Rivet cam chains.
Note: Do Not use for rear drive chains.
Part #: 35-0112
Note: Do Not use for rear drive chains.
Part #: 35-0112
USD$5.15 ea
Replacement Rivet Pin
Drive Chain Rivet Tool Replacement Rivet Pin
Fits: 35-0006 (Above)
Part #: 35-0007
Fits: 35-0006 (Above)
Part #: 35-0007
USD$8.85 ea
Replacement Breaker Pin
Replacement Breaker Pin for Kit #35-0112 Breaker Tool.
Replacement Breaker Pin for Cam Chain Breaker Tool.
Part #: 35-0117
Replacement Breaker Pin for Cam Chain Breaker Tool.
Part #: 35-0117
USD$55.45 Set/2
Chain Adjuster Stopper Set/2
Chain Adjuster Stopper Set/2. High quality steel made in Canada. These have been discontinued by Honda get these steel upgrades today! Replaces OEM# 52136-405-000 and 52136-ME1-670.
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1977-78) Hondamatic
Part #: 12-0101
Fits: Honda CB750K (1977-78),
CB750F (1977-78) Supersport,
CB750A (1977-78) Hondamatic
Part #: 12-0101
USD$22.15 ea
Drive Chain Breaker Tool
Drive Chain Breaker Tool.
Breaks 520/530 and 630 Pitch Chain.
Part #: 35-0083
Breaks 520/530 and 630 Pitch Chain.
Part #: 35-0083
USD$16.25 ea
Drive Chain Breaker Tool
Drive Chain Breaker Tool. Folding Handle & Heat Treated Pin.
Breaks 420/520 and 530 Pitch Chain
Part #: 35-9100
Breaks 420/520 and 530 Pitch Chain
Part #: 35-9100
USD$9.60 ea
Chain Puller Tool
Chain Puller Tool, Pulls new rear drive chain ends together so that the joiner link can be slipped in place. Ideal for new chains that are difficult to get together for the first time.
Part #: 35-0130
Part #: 35-0130
USD$4.80 ea
Chain Press Tool
Chain Press Tool Used to press on sideplates (rivet or clip type) onto rear drive chains.
Most late type High strength drive chains now use a press on sideplate
on the connecting link (including IZUMI 530 HT).
Part #: 35-0081
Most late type High strength drive chains now use a press on sideplate
on the connecting link (including IZUMI 530 HT).
Part #: 35-0081
USD$11.05 ea
Chain Alignment Tool
Chain Alignment Tool. This tool provides an easy way to verify your chain is aligned properly to the front and rear sprockets after rear wheel or chain maintenance.
Simply clamp this tool on the rear sprocket with the rod pointing to the front sprocket. With the rod as your guide, make visual alignment then adjust the chain adjusters as needed to correct alignment.
Part #: 35-0071
Simply clamp this tool on the rear sprocket with the rod pointing to the front sprocket. With the rod as your guide, make visual alignment then adjust the chain adjusters as needed to correct alignment.
Part #: 35-0071
USD$44.35 ea
Chain Rivet Tool - Hollow Chain Pin Riveter
Drive Chain Riveter Tool - Rivets high strength rear drive chain Rivet links with hollow pin ends as on our IZUMI 530HT Chain (Rivet link #56-0235) and many DID brand chains.
Part #: 35-0006
Part #: 35-0006
USD$17.00 ea
Chain Clip Link Remover Pliers
Chain Clip Link Remover Pliers. Slim jaw design allows for easy install and removal of chain clip links.
Part #: 35-0050
Part #: 35-0050
USD$9.60 ea
Brush Cleaning Tool
Blue Chain Cleaning Brush/ Gear Cleaner Tool.
Part #: 35-0055
Part #: 35-0055
USD$22.15 ea
Clutch & Sprocket Holder Tool
Clutch & Sprocket Holder Tool
Professional adjustable vise grip style clutch basket and sprocket holder tool.
Part #: 35-9052
Professional adjustable vise grip style clutch basket and sprocket holder tool.
Part #: 35-9052
USD$12.55 ea
Clutch Center Nut Removal Tool ~ Premium
Premium Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Both ends with 1/2 drive extension bar, Diameter 20 and 24.
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 35-0076
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 35-0076
USD$8.85 ea
Clutch Center Nut Removal Tool
Clutch Center Nut Removal Tool, The perfect tool for easier removal/fitting, without damaging the special locking nut. Inside diameter 24mm, use with 3/8" driver.
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 35-0051
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 35-0051
USD$22.15 ea
Rotor and Sprocket Holder
Rotor and Sprocket Holder. Keeps rotors, flywheels and sprockets from rotating during removal and installation. The adjustable stop-screw keeps the tool open at a set distance. Holds sprockets and rotors with holes center to center at a minimum distance of 13mm and a maximum distance of 230mm's.
Part #: 35-9121
Part #: 35-9121
USD$8.10 ea
Alternator Rotor Puller
Alternator Rotor Puller - 20mm x M1.5 Right Hand Thread Puller for pulling internal thread rotors.
Pulls Alternator Rotors on All Honda CB750's (1969-78)
Part #: 35-0030
Pulls Alternator Rotors on All Honda CB750's (1969-78)
Part #: 35-0030
USD$57.70 Set
Combination Flywheel Puller Driver Set
10 Piece Combination Flywheel Puller Driver Set. Used to separate flywheel from the crankshaft taper. Supplied in a labelled plastic storage case.
This 10 pieces set provides 15 different applications, sizes as follows:
M14x1.5, M16x1.5, M18x1.5, M19x1.0, M20x1.0, M27x1.25, M22x1.0, M25x1.5, M22x1.5, M26x1.5, M24x1.0, M27x1.0, M26x1.0, M28x1.0, M28x1.5
Except for M27X1.0, all applications have right hand threads.
Part #: 35-0074
This 10 pieces set provides 15 different applications, sizes as follows:
M14x1.5, M16x1.5, M18x1.5, M19x1.0, M20x1.0, M27x1.25, M22x1.0, M25x1.5, M22x1.5, M26x1.5, M24x1.0, M27x1.0, M26x1.0, M28x1.0, M28x1.5
Except for M27X1.0, all applications have right hand threads.
Part #: 35-0074
USD$17.00 ea
Piston Pin Puller
Piston Pin Puller
Fits Piston Sizes from 40mm (1 5/8") to 100mm (4") and Piston Pins From 12mm to 17mm
Tool has 2 threaded steps 12mm and 17mm. Diameter of the rod that goes through the piston pin is 8.5mm..
Part #: 35-0090
Fits Piston Sizes from 40mm (1 5/8") to 100mm (4") and Piston Pins From 12mm to 17mm
Tool has 2 threaded steps 12mm and 17mm. Diameter of the rod that goes through the piston pin is 8.5mm..
Part #: 35-0090
USD$40.65 ea
Steering Bearing Installation Tool
Steering Bearing Installation Tool. Includes one driver and three aluminum adapters. Unique system utilizes specially designed aluminum adaptors to quickly and accurately install nearly any lower bearing. Use with a soft faced hammer.
Part #: 35-0073
Part #: 35-0073
USD$22.15 ea
Steering Race Remover 25-35mm
Steering Head Bearing Race Remover, Range 25-35mm ID.
This tool will assist in removing motorcycle steering head bearing races. The size range is from 25mm to 35mm inside diameter. Can be driven with any hammer or mallet. Slips in the headtube solid end first until it snaps in behind the bearing race, then simply drive the race out of the frame.
Part #: 35-9123
This tool will assist in removing motorcycle steering head bearing races. The size range is from 25mm to 35mm inside diameter. Can be driven with any hammer or mallet. Slips in the headtube solid end first until it snaps in behind the bearing race, then simply drive the race out of the frame.
Part #: 35-9123
USD$22.15 ea
Steering Race Remover 35-55mm
Steering Head Bearing Race Remover, Range 35-55mm ID.
This tool will assist in removing motorcycle steering head bearing races. The size range is from 35mm to 55mm inside diameter. Can be driven with any hammer or mallet. Slips in the headtube solid end first until it snaps in behind the bearing race, then simply drive the race out of the frame.
Part #: 35-9124
This tool will assist in removing motorcycle steering head bearing races. The size range is from 35mm to 55mm inside diameter. Can be driven with any hammer or mallet. Slips in the headtube solid end first until it snaps in behind the bearing race, then simply drive the race out of the frame.
Part #: 35-9124
USD$23.65 ea
Bearing Packer
Wheel Bearing Grease Packer. To pack a bearing, place the bearing on the piston, press down on the cap until the old grease is forced out and the new grease shows on top of the bearing. Grease stays in the tool cavity, not on your hands. Transparent, impact resistant cup allows easy grease level checks. Works on bearings up to 3-1/2" OD or 89mm.
Part #: 35-9122
Part #: 35-9122
USD$8.10 ea
Deluxe Shock Preload Adjusting Tool
Deluxe Shock Preload Adjusting Tool. This tool helps to adjust shock preload without damaging the shock spring collars. It fits 35mm to 75mm spring collars.
Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-9108
Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-9108
USD$2.60 ea
Shock Preload Adjusting Tool
Ring Wrench to adjust shock preload.
Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-5033
Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-5033
USD$4.40 ea
Fork Cap Wrench ~24MM Size
Fork Cap Wrench ~ 24MM Size. This is a non-marring fork cap wrench that fits all motorcycles with 24MM fork caps. This wrench will allow you to remove your fork caps without worrying about damaging them.
Removes Stock 24mm Size Fork Caps on the models below
CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-9116
Removes Stock 24mm Size Fork Caps on the models below
CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-9116
USD$25.85 ea
35/36mm Fork Seal Drive
35/36mm High quality carbon steel fork seal driver with split design. Use this for easy installation of 35 or 36mm fork seals on either conventional or inverted forks.
35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-4299
35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-4299
USD$48.05 ea
Adjustable Fork Seal Driver 35-45mm
Adjustable 35-45mm Fork Seal Driver. This high quality tool can be used on many different fork sizes. Use these for easy installation of most fork seals on either conventional or inverted forks.
35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-3041
35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-3041
USD$221.95 Set
Deluxe Fork Seal Driver Set
Deluxe Fork Seal Driver Set. This set includes 9 high quality carbon steel fork seal drivers with split design. Use these for easy installation of most fork seals on either conventional or inverted forks.
Set Contains plastic storage case and the following drivers.
-35/36mm driver
-39mm driver
-41mm driver
-43mm driver
-45mm driver
-46/47mm driver
-48mm driver
-49/50mm driver
-54mm driver
Part #: 35-9109
Set Contains plastic storage case and the following drivers.
-35/36mm driver
-39mm driver
-41mm driver
-43mm driver
-45mm driver
-46/47mm driver
-48mm driver
-49/50mm driver
-54mm driver
Part #: 35-9109
USD$8.10 ea
Oil Filter Wrench
3/8" Drive Tripod Oil Filter Wrench
Fits: Aftermarket Spin-On Cartridge Oil filters (our #15-1006) for All Honda CB750's (1969-78).
Part #: 35-9022
Fits: Aftermarket Spin-On Cartridge Oil filters (our #15-1006) for All Honda CB750's (1969-78).
Part #: 35-9022
USD$14.75 ea
Fork Oil Level Gauge
Fork Oil Level Gauge for adjusting the oil level on all forks. Adjustable ring measures oil levels from 0-300mm in 50mm increments. 60ml capacity syringe adjusts fluid levels.
Part #: 35-1084
Part #: 35-1084
USD$11.80 ea
Oil / Fluid Container ~ 2 Liter
2 Liter Oil / Fluid Container with Long Spout.
Part #: 35-0088
Part #: 35-0088
USD$12.55 ea
Oil / Fluid Container ~ 4 Liter
4 Liter Oil / Fluid Container with Long Spout.
Part #: 35-9104
Part #: 35-9104
USD$10.30 Set
Snap Ring Plier Set
Snap Ring Plier Set (4pc) - Removes internal and external snap rings. Includes 2 straight and 2 angled tips.
Part #: 35-0114
Part #: 35-0114
USD$8.85 Tube
Autosol Chrome Polish (R)
(50 gram/ml) tube of Autosol Metal Polish.
Cleans, polishes, protects and removes corrosion.
For all metal parts-chrome, brass, copper, nickel,
stainless steel & aluminum.
"A product that is superior to anything else available" - has won awards and several medals on an international level.
Part #: 05-9004
Cleans, polishes, protects and removes corrosion.
For all metal parts-chrome, brass, copper, nickel,
stainless steel & aluminum.
"A product that is superior to anything else available" - has won awards and several medals on an international level.
Part #: 05-9004
USD$17.70 ea
Holding Tool
T-Handle Adjustable Holder for Pulleys, Flywheels, Hubs and other round smooth objects.
Part #: 35-0116
Part #: 35-0116
USD$13.30 ea
Metric Hook Wrench
Metric Hook Wrench, 60/65mm for Steering Head Adjustment.
Part #: 35-0005
Part #: 35-0005
USD$9.60 ea
Hose Remover Pliers
Hose Remover Pliers. For easy removal of 5/32" to 1/2" hoses. The jaw digs into the tube to grip it, squeeze and the hose is easily pushed off by the jaw.
Part #: 35-0049
Part #: 35-0049
USD$8.85 ea
Flexible Magnet Tool
Out of Stock
Email Me When Available
Flexible Rod with magnetic tip. 23" Long, picks up to 3.5 Lbs.
Part #: 35-9036
Part #: 35-9036
USD$5.55 ea
Fluid Hose Clamp
Fluid Hose Clamp, all steel construction with adjustable locking collar. Completely or partially closes flexible brake, fuel, and vacuum fluid lines.
Part #: 35-9117
Part #: 35-9117
USD$9.60 ea
Strap Wrench
Strap Wrench with rubberized strap for improved grip. Ideal for holding fork tubes and other round smooth shapes.
Fits: 29-160mm. 1 1/8" - 6 1/4" diameter items
Part #: 35-9024
Fits: 29-160mm. 1 1/8" - 6 1/4" diameter items
Part #: 35-9024
USD$7.05 ea
Flexible Metal Funnel
Out of Stock
Email Me When Available
Metal Funnel with 14" detachable metal nozzle.
Part #: 35-8040
Part #: 35-8040
USD$18.45 ea
382pc O-Rings Kit with Plastic Case
382pc O-Rings Kit with Plastic Case. 30 different sizes included in mm's.
QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia.
20X---1.78mm--2.90mm------------13X---2.62mm--9.19mm
20X---1.78mm--3.69mm------------13X---2.62mm--10.77mm
20X---1.78mm--4.47mm------------13X---2.62mm--12.37mm
20X---1.78mm--5.29mm------------13X---2.62mm--13.95mm
20X---1.78mm--6.07mm------------13X---2.62mm--15.54mm
20X---1.78mm--7.65mm------------13X---2.62mm--17.12mm
20X---1.78mm--9.25mm------------13X---2.62mm--18.72mm
10X---3.53mm--18.64mm----------10X---3.53mm--31.34mm
10X---3.53mm--20.22mm----------10X---3.53mm--32.92mm
10X---3.53mm--21.82mm----------10X---3.53mm--34.52mm
10X---3.53mm--23.39mm----------10X---3.53mm--36.10mm
10X---3.53mm--25.00mm----------10X---3.53mm--37.70mm
10X---3.53mm--26.57mm------------7X---5.34mm--37.47mm
10X---3.53mm--28.17mm------------7X---5.34mm--40.65mm
10X---3.53mm--29.75mm------------7X---5.34mm--43.82mm
Part #: 35-0066
QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia.
20X---1.78mm--2.90mm------------13X---2.62mm--9.19mm
20X---1.78mm--3.69mm------------13X---2.62mm--10.77mm
20X---1.78mm--4.47mm------------13X---2.62mm--12.37mm
20X---1.78mm--5.29mm------------13X---2.62mm--13.95mm
20X---1.78mm--6.07mm------------13X---2.62mm--15.54mm
20X---1.78mm--7.65mm------------13X---2.62mm--17.12mm
20X---1.78mm--9.25mm------------13X---2.62mm--18.72mm
10X---3.53mm--18.64mm----------10X---3.53mm--31.34mm
10X---3.53mm--20.22mm----------10X---3.53mm--32.92mm
10X---3.53mm--21.82mm----------10X---3.53mm--34.52mm
10X---3.53mm--23.39mm----------10X---3.53mm--36.10mm
10X---3.53mm--25.00mm----------10X---3.53mm--37.70mm
10X---3.53mm--26.57mm------------7X---5.34mm--37.47mm
10X---3.53mm--28.17mm------------7X---5.34mm--40.65mm
10X---3.53mm--29.75mm------------7X---5.34mm--43.82mm
Part #: 35-0066
USD$20.70 ea
419pc O-Rings Kit with Plastic Case
419pc O-Rings Kit with Plastic Case. 32 different sizes included metric sizes.
QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia.
20X---1.50mm--3.00mm------------13X---2.50mm--11.00mm
23X---1.50mm--7.00mm------------14X---2.50mm--13.00mm
23X---1.50mm--10.0mm------------13X---2.50mm--14.00mm
23X---1.50mm--13.0mm------------14X---2.50mm--16.00mm
20X---2.00mm--4.40mm------------14X---2.50mm--18.00mm
18X---2.00mm--5.00mm------------13X---2.50mm--19.00mm
14X---2.50mm--10.0mm------------14X---2.50mm--21.00mm
13X---2.50mm--22.00mm----------10X---3.50mm--31.00mm
10X---3.50mm--18.00mm----------10X---3.50mm--33.00mm
10X---3.50mm--20.00mm----------10X---3.50mm--34.50mm
10X---3.50mm--22.00mm----------10X---3.50mm--36.00mm
10X---3.50mm--23.50mm----------10X---3.50mm--38.00mm
10X---3.50mm--25.00mm----------10X---3.50mm--41.00mm
10X---3.50mm--26.50mm----------10X---3.50mm--44.00mm
10X---3.50mm--28.00mm----------10X---3.50mm--47.00mm
10X---3.50mm--30.00mm----------10X---3.50mm--50.00mm
Part #: 35-0067
QTY---Width----Inside Dia.---------QTY---Width-----Inside Dia.
20X---1.50mm--3.00mm------------13X---2.50mm--11.00mm
23X---1.50mm--7.00mm------------14X---2.50mm--13.00mm
23X---1.50mm--10.0mm------------13X---2.50mm--14.00mm
23X---1.50mm--13.0mm------------14X---2.50mm--16.00mm
20X---2.00mm--4.40mm------------14X---2.50mm--18.00mm
18X---2.00mm--5.00mm------------13X---2.50mm--19.00mm
14X---2.50mm--10.0mm------------14X---2.50mm--21.00mm
13X---2.50mm--22.00mm----------10X---3.50mm--31.00mm
10X---3.50mm--18.00mm----------10X---3.50mm--33.00mm
10X---3.50mm--20.00mm----------10X---3.50mm--34.50mm
10X---3.50mm--22.00mm----------10X---3.50mm--36.00mm
10X---3.50mm--23.50mm----------10X---3.50mm--38.00mm
10X---3.50mm--25.00mm----------10X---3.50mm--41.00mm
10X---3.50mm--26.50mm----------10X---3.50mm--44.00mm
10X---3.50mm--28.00mm----------10X---3.50mm--47.00mm
10X---3.50mm--30.00mm----------10X---3.50mm--50.00mm
Part #: 35-0067