500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oils and other fluids.
Part #: 35-2211

Joker Machine Brand Oil Tank Mounting Bushing Set/3

This set is for those who are running no oil tank side covers and an exposed stock oil tank. These trim bushings and grommets are a great alternative to the stock hardware!

Stepped "Isolator" designed bushing obtains the right amount of tension on the rubber when fully tightened to reduce vibration on the oil tank. Bushing is fully CNC machined from 6061-T6 Aluminum. High quality alloy "Gold" Allen head mounting hardware is included, along with special rubber grommets.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 12-0107

Oil Pressure Switch Wire Assembly. Includes the Wire and Rubber Cover. Replaces OEM # 31270-300-154 / 31270-300-005

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 24-4020

Oil Passage Cap with O-Ring. Replaces OEM # 15331-300-000 (Oil Passage Cap) and OEM # 94608-40000 (O-Ring).

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic

Note: Sold Each, Order the Quantity of Caps you Require
Part #: 73-0077

250 ml Graduated Cylinder

250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids.
Part #: 35-2210

Athena Overhaul Gasket Set - Fits: All Honda CB750's (1969-78)

Sets made by Athena of Italy the European original equipment supplier to Yamaha, Honda, Kawasaki, Suzuki and all major Italian bike makers. Top Quality ISO-9000 approved.

Set contains: 18-7001 Cylinder Base Gasket, 18-7002 Cylinder Head Gasket, 18-7003 Cam Cover Gasket, 18-7004 Oil Pan Gasket (Late), 18-7012 Oil Pan Gasket (Early), 12-5038 Alternator (Dyno) Cover Gasket, 18-7006 Shift Cover Gasket, 12-5037 Clutch cover Gasket, 18-7008 Oil Pump Gasket, 18-7009 Cam Chain Tensioner Gasket, 18-7010 Point Plate Cover Gasket, 18-7011 Starter Motor Cover Gasket, 18-7013-4pc. Exhaust Headpipe Gaskets, 18-7014 O-Ring for Breather Cover, 01-0137-6pc. Cylinder Nut Cover Rubbers, 18-7068 4 pc. Cylinder Sleeve Base O-Rings, 01-0131 8 pc. Valve stem seals, 18-7018 8 pc. rubber cylinder stud packings, 18-7053 Oil Pan Gasket. Set does Not contain Engine Oil Seals - See Oil Seal Set Listings Below.
Part #: 18-0110

Joker Machine Brand ~ Oil Pressure Gauge Assembly. Silver Colored Mount Assembly with a Silver Colored Stainless Steel Marshall liquid filled gauge 1 1/2" (38mm) diameter, 0 to 100 PSI. Easily installs on the oil gally port above the points cover in minutes!

Features 2 built-in Neoprene rubber o-rings recessed in 2 fittings that have a unique rotating section that enables you to easily position the gauge for perfect rider visability. Just loosen the billet hex fitting, rotate into position, then tighten.

High quality made in the U.S.A

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 73-1067

Joker Machine Brand ~ Oil Pressure Gauge Assembly. Black Colored Mount Assembly with a Silver Colored Stainless Steel Marshall liquid filled gauge 1 1/2" (38mm) diameter, 0 to 100 PSI. Easily installs on the oil gally port above the points cover in minutes!

Features 2 built-in Neoprene rubber o-rings recessed in 2 fittings that have a unique rotating section that enables you to easily position the gauge for perfect rider visibility. Just loosen the billet hex fitting, rotate into position, then tighten.

High quality made in the U.S.A

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 73-1158

Overhaul Engine Gasket Set

Fits: All Honda CB750K/F/P's (1969-78)

Set contains: 18-7001 Cylinder Base Gasket, 18-7002 Cylinder Head Gasket, 18-7003 Cam Cover Gasket, 18-7004 Oil Pan Gasket (Late), 12-5038 Alternator (Dyno) Cover Gasket, 18-7006 Shift Cover Gasket, 12-5037 Clutch cover Gasket, 18-7008 Oil Pump Gasket, 18-7009 Cam Chain Tensioner Gasket, 18-7010 Point Plate Cover Gasket, 18-7011 Starter Motor Cover Gasket, 17-3812 -4pc. Exhaust Headpipe Gaskets, 18-7014 O-Ring for Breather Cover, 18-7068 4 pc. Cylinder Sleeve Base O-Rings, 01-0131 8 pc. Valve stem seals, 18-7018 8 pc. rubber cylinder stud packings. Set does Not contain Engine Oil Seals - See Oil Seal Set Listings Below.
Part #: 18-0441

Tachometer & Speedometer Jewel Set. Includes Four Jewels/Lenses: Red (Hi-Beam), Orange (Turn Signals), Green (Neutral) and Red (Oil Pressure).

Fits: Honda CB750K (1969-71)
Part #: 49-0251

Joker Machine Brand ~ Custom Performance Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM # 92800-12000

Plug features an extended length HIGH POWER "rare earth" Neodymium-Iron-Boron Magnet pressed into the body which grabs steel debris from your tank and motor exceptionally well! High Quality CNC machined part made in the U.S.A.

Works on the oil tank drain (right side of bike) and on the oil pan drain (beneath the engine) - use two for the ultimate engine oil debris collection set-up.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 73-1074

1969-70 Performance Main Jet Kit. Kit includes a total of 16 Main Jets for Keihin Carbs. Use this jet kit to unleash the extra power you should have from your aftermarket exhaust, flee flowing air filters or any engine mods you have made.

Kit includes Main Jets #140 (X4), #142 (X4), #145 (X4), #148 (X4)

Fits: All Honda CB750K (1969-70) with Keihin Carbs
Part #: 48-2113

1971 Performance Main Jet Kit. Kit includes a total of 16 Main Jets for Keihin Carbs. Use this jet kit to unleash the extra power you should have from your aftermarket exhaust, flee flowing air filters or any engine mods you have made.

Kit includes Main Jets #120 (X4), #122 (X4), #125 (X4) and #128 (X4).

Fits: Honda CB750K (1971) with Keihin Carbs
Part #: 48-2114

Joker Machine Brand ~ Chain oiler (final shaft) plug eliminates the messy chain oiler assembly with one of these simple plugs! Replaces OEM # 23523-300-310

Installs easily by cleaning hole with brake cleaner to remove all traces of oil. Then fill with RTV slicone (Permatex) and tap the chain oiler plug in place.

High quality CNC machined part made in the U.S.A.

Fits: Honda CB750K (1969-75)
Part #: 73-1063

Performance Main Jet Kit. Kit includes a total of 16 Main Jets for Keihin Carbs. Use this jet kit to unleash the extra power you should have from your aftermarket exhaust, flee flowing air filters or any engine mods you have made.

Kit includes Main Jets #105 (X4), #110 (X4), #115 (X4) and #120 (X4).

Fits: All Honda CB750's (1972-1978) with Keihin Carbs
Part #: 48-2111

Ultimate Performance Main Jet Kit. Kit includes a total of 44 Main Jets for Keihin Carbs. Use this jet kit to unleash the extra power you should have from your aftermarket exhaust, flee flowing air filters or any engine mods you have made.

Kit includes Main Jets #100 (X4), #102 (X4), #105 (X4), #108 (X4), #110 (X4), #112 (X4), #115 (X4), #118 (X4), #120 (X4), #122 (X4) and #125 (X4)

Fits: All Honda CB750's (1972-1978) with Keihin Carbs
Part #: 48-2112

Pilot Jet Set of 4 (Size #35). Jet Height 28mm, Outer Diameter 5.5mm.

Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible. Also, when installing new exhaust or high flow air filters it is recommended to increase the size of your Pilot Jets.

We list the stock Pilot Jet Sizes that came with the bikes below, you can use this list as a reference if you are trying to increase/decrease or keep the pilot jet size stock. We offer other sizes (above/below this part listing).

Honda CB750K (1969-76) - Stock Size 40,
CB750F (1975-76) Supersport - Stock Size 40
Part #: 48-3100

Pilot Jet Set of 4 (Size #38). Jet Height 28mm, Outer Diameter 5.5mm.

Pilot Jets (your idle and low speed operation) are critical for smooth idling and lower rpm driving. When rebuilding carbs it is highly recommended to replace these pilot jets to ensure your bike is running as well as possible. Also, when installing new exhaust or high flow air filters it is recommended to increase the size of your Pilot Jets.

We list the stock Pilot Jet Sizes that came with the bikes below, you can use this list as a reference if you are trying to increase/decrease or keep the pilot jet size stock. We offer other sizes (above/below this part listing).

Honda CB750K (1969-76) - Stock Size 40,
CB750F (1975-76) Supersport - Stock Size 40
Part #: 48-3102