Series 1: Search Results for “35-9030”
154 products
Page 6 of 8
USD$9.60 ea
Strap Wrench
Strap Wrench with rubberized strap for improved grip. Ideal for holding fork tubes and other round smooth shapes.
Fits: 29-160mm. 1 1/8" - 6 1/4" diameter items
Part #: 35-9024
Fits: 29-160mm. 1 1/8" - 6 1/4" diameter items
Part #: 35-9024
USD$11.05 Set
Screw Extractor Set
5pc Screw Extractor Set - used to remove broken off studs, bolts, & screws. Set includes sizes - 1/8", 3/16", 15/64", 5/16", & 3/8"
Part #: 35-9048
Part #: 35-9048
USD$16.25 Set
Pin Punch Set
8 pc. Metric Pin Punch Set
Set includes small sizes usually not available:
1.5mm, 2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm, 5.5 mm,
6.0 mm, & 8.0 mm in storage case
Part #: 35-9050
Set includes small sizes usually not available:
1.5mm, 2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm, 5.5 mm,
6.0 mm, & 8.0 mm in storage case
Part #: 35-9050
USD$25.85 Set
T Handle Wrench Set
7pc T Handle Wrench Set/Socket Set.
Set includes 8mm, 10mm, 12mm, 14mm and 17mm 6 point socket wrenches and one phillips #2 and #3 screwdriver tips.
Part #: 35-9101
Set includes 8mm, 10mm, 12mm, 14mm and 17mm 6 point socket wrenches and one phillips #2 and #3 screwdriver tips.
Part #: 35-9101
USD$8.10 ea
Deluxe Shock Preload Adjusting Tool
Deluxe Shock Preload Adjusting Tool. This tool helps to adjust shock preload without damaging the shock spring collars. It fits 35mm to 75mm spring collars.
Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-9108
Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-9108
USD$8.10 Set
Carb Cleaning Tool Set
Carburetor Cleaning Tool Set. Includes 20 steel wire ends designed for cleaning the tiny holes found in carburetor jets. Cleaning wire sizes range from 0.45mm to 1.5mm.
Part #: 35-9110
Part #: 35-9110
USD$16.25 Set
Piston Ring Tool
Piston Ring Tool with plastic storage case. This tool is designed to prevent ring breakage during cylinder installation. This tool can be easily removed after cylinder is in position. Fits 40-85mm sizes.
Part #: 35-9112
Part #: 35-9112
USD$221.95 Set
Deluxe Fork Seal Driver Set
Deluxe Fork Seal Driver Set. This set includes 9 high quality carbon steel fork seal drivers with split design. Use these for easy installation of most fork seals on either conventional or inverted forks.
Set Contains plastic storage case and the following drivers.
-35/36mm driver
-39mm driver
-41mm driver
-43mm driver
-45mm driver
-46/47mm driver
-48mm driver
-49/50mm driver
-54mm driver
Part #: 35-9109
Set Contains plastic storage case and the following drivers.
-35/36mm driver
-39mm driver
-41mm driver
-43mm driver
-45mm driver
-46/47mm driver
-48mm driver
-49/50mm driver
-54mm driver
Part #: 35-9109
USD$48.05 ea
Adjustable Fork Seal Driver 35-45mm
Adjustable 35-45mm Fork Seal Driver. This high quality tool can be used on many different fork sizes. Use these for easy installation of most fork seals on either conventional or inverted forks.
35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-3041
35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-3041
USD$14.75 Set
Fork Seals
Fork Seal Set - 35 x 46 x 11. Made In Japan by OEM supplier.
Replaces OEM # 91255-292-003
Fits: Honda CB750K (1969-70)
Part #: 27-1077
Replaces OEM # 91255-292-003
Fits: Honda CB750K (1969-70)
Part #: 27-1077
USD$8.10 ea
Alternator Rotor Puller
Alternator Rotor Puller - 20mm x M1.5 Right Hand Thread Puller for pulling internal thread rotors.
Pulls Alternator Rotors on All Honda CB750's (1969-78)
Part #: 35-0030
Pulls Alternator Rotors on All Honda CB750's (1969-78)
Part #: 35-0030
USD$18.45 Set
T Handle Hex Key Set (SAE Type)
T Handle Hex Key Set (SAE Type), with Metal Holder.
Contains Sizes- 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8".
Part #: 35-0053
Contains Sizes- 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8".
Part #: 35-0053
USD$4.65 ea
Valve Lapping Stick Set
Valve Lapping Stick Set/2. One stick has 5/8" & 13/16" diameter cup ends, the other has 1 1/8" & 1 3/8" diameter cup ends. Holds valve face so valve seat can be seated correctly with lapping paste.
Part #: 35-0059
Part #: 35-0059
USD$16.25 ea
Aluminum Vise Insert
Aluminum Vise Insert. A perfect addition to make your workbench vise more versatile. Three machined semi circles to hold 5/16" to 9/16" size parts you need to grip. The bridge spring keeps the jaws aligned and allows the inset to open precisely with the vise.
Part #: 35-0068
Part #: 35-0068
USD$11.05 ea
Chain Alignment Tool
Chain Alignment Tool. This tool provides an easy way to verify your chain is aligned properly to the front and rear sprockets after rear wheel or chain maintenance.
Simply clamp this tool on the rear sprocket with the rod pointing to the front sprocket. With the rod as your guide, make visual alignment then adjust the chain adjusters as needed to correct alignment.
Part #: 35-0071
Simply clamp this tool on the rear sprocket with the rod pointing to the front sprocket. With the rod as your guide, make visual alignment then adjust the chain adjusters as needed to correct alignment.
Part #: 35-0071
USD$9.60 Kit
Brake Bleeder Hose Kit
Brake Bleeder Hose Kit. Kit includes 1-way valve, hose and clamps.
This tool helps bleed motorcycle brakes quickly and easily. The 1-way valve prevents air from flowing back into the brake lines. Easy to use, simply connect and pump.
Part #: 35-0072
This tool helps bleed motorcycle brakes quickly and easily. The 1-way valve prevents air from flowing back into the brake lines. Easy to use, simply connect and pump.
Part #: 35-0072
USD$14.00 ea
Carburetor Adjusting Tool
Carburetor Adjusting Tool. Works with Mikuni or Keihin carbs. 11" long tool with a 8mm hex nut and screwdriver slot adjusting bolt. This combo design allows unlocking of the locknut, adjustments to the balancing screw and re-locking the lock nut in one step.
Part #: 35-0084
Part #: 35-0084
USD$17.00 ea
Piston Pin Puller
Piston Pin Puller
Fits Piston Sizes from 40mm (1 5/8") to 100mm (4") and Piston Pins From 12mm to 17mm
Tool has 2 threaded steps 12mm and 17mm. Diameter of the rod that goes through the piston pin is 8.5mm..
Part #: 35-0090
Fits Piston Sizes from 40mm (1 5/8") to 100mm (4") and Piston Pins From 12mm to 17mm
Tool has 2 threaded steps 12mm and 17mm. Diameter of the rod that goes through the piston pin is 8.5mm..
Part #: 35-0090
USD$36.20 ea
3/8" Drive Click Type Torque Wrench Tool
3/8" Drive Window Click Type Torque Wrench Tool with Black Plastic Storage Case. 10-100Ft. Lbs.
This click-style torque wrench easily tightens various automotive bolts, from lugs and crankshaft bolts to cylinder heads and engine-mountings. Measures from 10 to 100 foot/pounds in .5 increments.
Part #: 35-0099
This click-style torque wrench easily tightens various automotive bolts, from lugs and crankshaft bolts to cylinder heads and engine-mountings. Measures from 10 to 100 foot/pounds in .5 increments.
Part #: 35-0099
USD$13.30 ea
Extractor & Drill Set
10 Piece Extractor & Drill Set in a Plastic Case. Set contains 5X extractors (#1 through #5) and 5X mechanic's length cobalt drills. Removes bolts and screws up to 5/8".
Cobalt Drill and Screw Extractor Sizes: 5/64", 7/64", 5/32", 1/4", 19/64"
Part #: 35-0100
Cobalt Drill and Screw Extractor Sizes: 5/64", 7/64", 5/32", 1/4", 19/64"
Part #: 35-0100