Exhaust Port Gasket - 1 Pc.-OEM # 18291-254-000 / 18291-MM5-860

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
CB750A (1976-78) Hondamatic

Sold Each, Order the Quantity you Require.
Part #: 17-2812

Cylinder Head to Exhaust Headpipe Gasket (1 Pc)
OEM # 18291-MM5-860

Fits: All Honda CB750's (1969-78)

Sold Each, Order the Quantity you Require
Part #: 18-7013

Headpipe to Collector Gasket

Fits: Honda CB750F (1976-77) Supersport
Part #: 17-4529

Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Left Side of the Bike. Replaces OEM # 18232-300-010

Fits: Honda CB750K (1971-76) Left Side Muffler

Note: Each Bike Requires 2 Left Side Exhaust Flange Clamps (One per Muffler). Order the Quantity you Require.
Part #: 07-4635

Chrome Exhaust Flange Clamp with Bolt for One of the Stock Type Mufflers on the Right Side of the Bike. Replaces OEM # 18231-300-010

Fits: Honda CB750K (1971-76) Right Side Muffler

Note: Each Bike Requires 2 Right Side Exhaust Flange Clamps (One per Muffler). Order the Quantity you Require.
Part #: 07-4634

Stock Type Exhaust Flange Clamp, Replaces OEM# 18231-392-000

Fits: Honda CB750K (1977-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondmatic

Note: Each Bike Requires 4 Exhaust Flange Clamps. Order the Quantity you Require.
Part #: 07-4622

Exhaust Pipe Flange. This Flange is used with the Stock Type Mufflers. Replaces OEM # 18236-300-030

Fits: Honda CB750K (1969-76)

Note: Each Bike Require 4 Exhaust Pipe Flanges (One per Muffler). Order the Quantity you Require.

We Sell the Fastening Flange Bolts for these (Below) if you Require Them
Part #: 07-4632

Exhaust Flange Clamp Bolt. Used to Fasten the Stock Type Exhaust Flange Clamps. Replaces OEM # 92101-08032-0B

Fits: Honda CB750K (1969-76)

Note: Each Bike Requires 4 Exhaust Flange Clamp Bolts (One per Exhaust Flange Clamp). Order the Quantity you Require.
Part #: 07-4636

Exhaust Pipe Flange Bolt (Set/2 Bolts). These Bolts are for the Exhaust Pipe Flanges Used when Installing Exhaust. Replace OEM # 93600-08022

Fits: Honda CB750K (1969-76)

Note: Each Bolt Set Includes 2 Bolts (Enough for One Exhaust Pipe Flange). Order the Quantity of Bolt Sets you Require.
Part #: 07-4633

Muffler Connecting Tube Set for the Stock OEM Exhaust System. Includes 1 Tube, 1 Band Clamp and 1 Screw. Replaces OEM # 18472-300-000 (Tube), OEM # 18473-300-000 (Band Clamp), OEM # 93500-05016 (Screw).

Fits: Honda CB750K (1969-76)

Note: 2 Sets Used Per Bike, Order the Quantity you Require
Part #: 73-0909

Exhaust Hardware 10 Piece Set. This Set includes various hard to find hardware needed to install the Stock OEM Type Exhaust.

Set Includes:
X1 stand stopper rubber C 95011-63000
X1 stand stopper rubber A 95011-63000
X2 pillon step bolt 90146-300-020
X2 nut 94030-12000
X2 flat washer 94102-12000
X2 spring washer 94111-12000

Fits: Stock Type Exhaust on Honda CB750K (1969-76)

Note: Exhaust Flange Clamps and Exhaust Pipe Flanges with Hardware are Not Included in this Set, We Sell them Separate.
Part #: 73-0149

Kick Stand Stopper Rubber "A" - Replaces OEM# 95011-61000.

Fits: Honda CB750K (1969-78),
CB750A (1976-78) Hondamatic,
CB750F (1978) Supersport
Part #: 07-4624

Exhaust Stud Set. Includes 8 Exhaust Studs and 8 Flange Nuts.

Fits: Honda CB750K (1977-78),
CB750F (1975-78) Supersport
Part #: 73-1141

1 1/2" ID Chrome Heavy Duty Center Clamp with Nut & bolt.
Part #: 07-0001

1 3/4" ID Chrome Heavy Duty Center Clamp with Nut & bolt.
Part #: 07-0002

1 7/8" ID Chrome Heavy Duty Center Clamp with Nut & bolt.

Fits: MAC & Universal Mufflers.
Part #: 07-0003

1 15/16" ID Powder Coat Black Heavy Duty Center Clamp with Nut & bolt.
Part #: 07-0422

Chrome 2 3/8" ID Clamp for MAC 4-2 Exhaust (at collector).

Bolt Not Included
Part #: 07-0406

Powder Coat Black 2 3/8" ID Clamp for MAC 4-2 Exhaust (at collector).
Part #: 07-0407

Powder Coat Black 2 3/4" ID Clamp for MAC 4-1 Exhaust (at collector).
Part #: 07-0405

6" Chrome Hanger strap with nut & bolt, made of 1/8" Steel.
Part #: 07-0006

Center Stand Stop Rubber fits universal metal center stand stops above.

1 1/4" Diameter x 3/8" Cushion, Fits 3/8" Hole
Part #: 07-4623