Signal Lamp - Amber - 12v 2 wire for Front or Rear - Replaces OEM# 33400-341-702

Fits: Honda CB750K (1970-74),
CB750P/P3/P5 (1973-75) Police
Part #: 11-2122

Red Turn Signal Lamp Lens with Gasket and 2 Screws. OEM Ref. #33402-268-671

Fits: Honda CB750K (1970-74),
CB750P/P3/P5 (1973-75) Police
Signal #11-2122 (Above)
Part #: 11-2160

Signal Lamp Lens - Amber - OEM # 33402-268-671

Fits: Honda CB750K (1970-74),
CB750P/P3/P5 (1973-75) Police,
Signal #11-2122 (Above)
Part #: 11-2110

Turn Signal Lamp Gasket, Replaces OEM # 33443-268-671

Fits: Honda CB750K (1970-74),
CB750P/P3/P5 (1973-75) Police
Fits: Signal Lens #11-2110 and Signal #11-2122 (Above)
Part #: 11-2085

Rear Signal Lamp - Amber - 12v 1 wire Rear - OEM # 33400-377-671 /
33400-460-671 / 33400-460-679

Fits: Honda CB750K (1975-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 11-2149

Front Signal Lamp - Amber - 12v 2 wire - OEM # 33400-377-671 / 33400-461-671 / 33400-460-679

Fits: Honda CB750K (1975-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 11-2114

Signal Lamp Lens - Amber - OEM # 33402-377-671

Fits: Honda CB750K (1975-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic,
Signal Lamp #11-2114 and #11-2149 (Above)
Part #: 11-2195

Signal Lamp Lens - Smoked - OEM # 33402-377-671

Fits: Honda CB750K (1975-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic,
Signal Lamp #11-2114 and #11-2149 (Above)
Part #: 11-2153

Signal Lamp Lens - Clear - OEM # 33402-377-671

Fits: Honda CB750K (1975-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic,
Signal Lamp #11-2114 and #11-2149 (Above)
Part #: 11-2152

Turn Signal Lamp Gasket, Replaces OEM # 33406-377-671

Fits: Honda CB750K (1975-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Fits: Signal Lamps Lens #11-2195 and Signals #11-2114 and 11-2149 (Above).
Part #: 11-2084

Rear Turn Signal Ground Cables (Pk/2), Replaces OEM # 33620-300-000 These Cables are Needed in order to Ground the Rear Turn Signals, Overall Length 550mm.

Fits: Honda CB750K (1969-71)
Part #: 73-1117

Rear Turn Signal Mount, Collar and Rubber Set. Includes both Left and Right Sides. These are needed when installing the Rear signals. Replaces OEM # 33605-323-670 (Left Side), 33606-074-010 (Right Side).

Fits: Honda CB750K (1972-74)
Part #: 73-0127

Rear Signal Lamp Stay Screw Set/2. This Set Includes the Screw that Fastens the Rear Signal Lamp Stays to the Rear Turn Signal Mount & Collars (#73-0127).

Set includes 2 screws to fasten both rear signal stays

Fits: Honda CB750K (1972-74)
Part #: 49-0001

Rear Turn Signal Rubbers Pk/2, Replaces OEM # 33606-371-000 These are the Rubbers that Go Under the Rear Turn Signal Stays.

Fits: Honda CB750A (1976-78) Hondamatic

Each Rear Turn Signal Uses 2 Signal Rubbers
Part #: 73-0834

Turn Signal Lamp Lens Screw Set/2, Replaces OEM # 93500-04025-0A

Fits: Honda CB750K (1975-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
PLUS our Signal Lens #11-2195 and Signals #11-2114 and #11-2149
Part #: 73-1034

Front Signal Lamp Stay - Chrome.

Body Length 40mm, Thread 30mm, Total Length 70mm.

Fits: Front Honda CB750K (1969-74)
Signal Lamp #11-2122

Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase
Part #: 73-1106

Front Signal Lamp Stay - Chrome.

Body Length 65mm, Thread 25mm, Total Length 90mm.

Fits: Front Honda CB750K (1969-74)
Signal Lamp #11-2122

Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase
Part #: 11-2167

Front Signal Lamp Stay with Nut and Washer ~ Short Type - Chrome.

Body Length 26mm, Thread 21mm, Total Length 47mm.

Fits: Front Honda CB750K (1969-74)
Signal Lamp #11-2122

Note: We sell these in Various Lengths, Confirm this is the Size you would Like Before Purchase
Part #: 73-1105

Extended Length Rear Signal Lamp Stay - Chrome - OEM # 33441-369-000 125mm Long.

Fits: REARS on Honda CB750K (1972-74)
Plus our Signal Lamp #11-2122

Note: This Signal Stay is longer then the stock length stay (65mm) offered above.
Part #: 11-2318

Rear Signal Lamp Stay - Chrome - OEM # 33607-323-670
65mm Long.

Fits: REARS on Honda CB750K (1972-74)
Plus our Signal Lamp #11-2122.
Part #: 11-2319

Chrome Metal Fork Ear Clamp/Turn Signal Light Mount Bracket Holder Set/2 with Screws, Washers and Nuts.

Fits 30-45mm Front Forks
Part #: 09-0099

Black Metal Fork Ear Clamp/Turn Signal Light Mount Bracket Holder Set/2 with Screws, Washers and Nuts.

Fits 30-45mm Front Forks
Part #: 09-0098

Custom LED Turn Signal Set/2.

3.5" Long Turn Signals with 10" Long Wires, DC 12 Volt. Will screw on to 10mm Screw holes. 2 Wire (Signal and Ground).

These Require an LED relay to work. We sell these #12-0130
Part #: 12-0131

Custom LED Amber Lens Turn Signal Set/2.

2.5" Long Turn Signals with 10.5" Long Wires, DC 12 Volt. Will screw on to 8mm Screw holes. 2 Wire (Signal and Ground).

These Require an LED relay to work. We sell these #12-0130
Part #: 12-0132

LED 2 Pin Flasher/ Turn Signal Relay.

12V LED Relay. Designed specifically for LED turn signals. 2 Pin Style.

0.02~10A wide rated current, can be used on DC 12V motorcycles
Part #: 12-0130

1156 White LED Turn Signal Bulb Set/2

These high brightness LED bulbs look amazing! Can be used for turn signals.

Bulb total length 42mm, width 15mm. These are super bright 1600 Lumen LED bulbs. Well built with Aviation-grade aluminum. Made-to-last design is vibration resistant - great for withstanding rough rides. Upgrade your bike today!

Some motorcycles require the buzzer to be disconnected in order to use LED's.

When switching to LED Signals you must change your flasher relay to an LED compatible relay - We carry these #12-0130.
Part #: 10-0037

1156 Amber LED Turn Signal Bulb Set/2

These high brightness LED bulbs look amazing! Can be used for turn signals.

Bulb total length 42mm, width 15mm. These are super bright 1600 Lumen LED bulbs. Well built with Aviation-grade aluminum. Made-to-last design is vibration resistant - great for withstanding rough rides. Upgrade your bike today!

Some motorcycles require the buzzer to be disconnected in order to use LED's.

When switching to LED Signals you must change your flasher relay to an LED compatible relay - We carry these #12-0130.
Part #: 10-0038

1157 White LED Turn Signal or Tail Light Bulb Set/2

These high brightness LED bulbs look amazing! Can be used for turn signals or the tail light.

Bulb total length 42mm, width 15mm. These are super bright 1600 Lumen LED bulbs. Well built with Aviation-grade aluminum. Made-to-last design is vibration resistant - great for withstanding rough rides. Upgrade your bike today!

Some motorcycles require the buzzer to be disconnected in order to use LED's.

When switching to LED Signals you must change your flasher relay to an LED compatible relay - We carry these #12-0130.
Part #: 10-0039

1157 Amber LED Turn Signal Bulb Set/2

These high brightness LED bulbs look amazing! Can be used for turn signals.

Bulb total length 42mm, width 15mm. These are super bright 1600 Lumen LED bulbs. Well built with Aviation-grade aluminum. Made-to-last design is vibration resistant - great for withstanding rough rides. Upgrade your bike today!

Some motorcycles require the buzzer to be disconnected in order to use LED's.

When switching to LED Signals you must change your flasher relay to an LED compatible relay - We carry these #12-0130.
Part #: 10-0040

1156 Amber LED Turn Signal Bulb Set/2

These high brightness wide exposure range LED bulbs look amazing! Can be used for turn signals.

Bulb total length 55mm, width 20mm. These are about 3X brighter then the stock halogen bulbs. Features an intelligent temperature control chip for fast cooling to prolong the life of these bulbs! Upgrade your bike today!

Some CB's require the buzzer to be disconnected in order to use LED's.

When switching to LED Signals you must change your flasher relay to an LED compatible relay - We carry these #12-0130.
Part #: 10-1166

1157 Amber LED Turn Signal Bulb Set/2

These high brightness wide exposure range LED bulbs look amazing! Can be used for the turn signals.

Bulb total length 55mm, width 20mm. These are about 3X brighter then the stock halogen bulbs. Features an intelligent temperature control chip for fast cooling to prolong the life of these bulbs! Upgrade your bike today!

Some CB's require the buzzer to be disconnected in order to use LED's.

When switching to LED Signals you must change your flasher relay to an LED compatible relay - We carry these #12-0130.
Part #: 10-1167

1157 White LED Turn Signal / Tail Light Bulb Set/2

These high brightness wide exposure range LED bulbs look amazing! Can be used for the turn signals or tail light.

Bulb total length 55mm, width 20mm. These are about 3X brighter then the stock halogen bulbs. Features an intelligent temperature control chip for fast cooling to prolong the life of these bulbs! Upgrade your bike today!

Some CB's require the buzzer to be disconnected in order to use LED's.

When switching to LED Signals you must change your flasher relay to an LED compatible relay - We carry these #12-0130.
Part #: 10-1168

Single Filament 1156 Strobe LED Turn Signal Bulb Pk/2.
Part #: 10-1165

Double Filament 1157 Strobe LED Turn Signal Bulb Pk/2.

These bulbs feature a safety strobe. If used for tail light can use for on/off. If used for brake lights the bulb strobes quickly.
Part #: 10-1164

Custom Ambassador Style Turn Signal / Marker Light Lamp with Amber Lens.

Single filament bulb, one wire. These are ground through the housing. Can be used as either a turn signal or marker light.
Part #: 11-2150

Custom Bullet Style Turn Signal / Marker Light Lamp with Red Lens.

Single filament bulb, one wire. These are ground through the housing. Can be used as either a turn signal or marker light.

Note: If you want these in Amber we sell the lenses below #11-6503 so you can easily make this swap.
Part #: 11-2146

Amber Lens for the Bullet Style Turn Signal / Marker Light Lamp (#11-2146). This #11-2146 Marker Light comes with a red lens, if you would like them to be amber this is what you need!

Sold Each, Order the Quantity you Require
Part #: 11-6503

Custom Winged Zeppelin Turn Signal / Marker Light Lamp with Amber Lens.

Single filament bulb, one wire. These are ground through the housing. Can be used as either a turn signal or marker light.

Note: We sell replacement lenses for these below #11-6503 if required.
Part #: 11-2145

Custom Mini Cateye Turn Signal Lamp Set/2 with Amber Lens.

These compact signals have a carbon body that measures 2 1/2" long. 12 Volt single filament bulb. These can be used as turn signals or market lights, 2 Wires.
Part #: 11-2327

Custom Mini Cateye Turn Signal Lamp Set/2 with Clear Lens.

These compact signals have a carbon body that measures 2 1/2" long. 12 Volt single filament bulb. These can be used as turn signals or market lights, 2 Wires.
Part #: 11-2328

Custom 3" Long Mini-Stem Turn Signal Lamp Set/2.

12 Volt single filament bulbs. These can be used as turn signals or market lights, 2 Wires.
Part #: 11-2329

Custom Mini Black Bullet Turn Signal Lamp Set/2. Satin black high quality aluminum housing with a clear lens and amber single filament bulb. For use as turn signals only (not a running light).

Stem base to outer edge of body 2 1/4", body is 1 1/2" round and 2 5/8" long, 3/8" x 1" long mounting stud.
Part #: 11-2087

Custom Chrome Mini 2 Wire Deco Turn Signal Lamp Set/2. High quality die cast body with interchangeable lenses (amber and red). Can be wired as turn signals or running lights.

Stem base to outer edge of body 2 1/2", body is 1 7/8" x 2 7/8" long, mounting stud 1/4" diameter x 3/4" long.

Note: We sell replacement amber lenses for these #11-6503 if required.
Part #: 09-0095

Custom Black Mini 2 Wire Deco Turn Signal Lamp Set/2. High quality die cast body with Red lens. Can be wired as turn signals or running lights.

Stem base to outer edge of body 2 1/2", body is 1 7/8" x 2 7/8" long, mounting stud 1/4" diameter x 3/4" long.
Part #: 11-2082

Custom Black Mini 2 Wire Deco Turn Signal Lamp Set/2. High quality die cast body with Amber lens. Can be wired as turn signals or running lights.

Stem base to outer edge of body 2 1/2", body is 1 7/8" x 2 7/8" long, mounting stud 1/4" diameter x 3/4" long.
Part #: 11-2088

Turn Signal Pinch Bolt Set. Includes 2X Chrome Bolts, 2X Hex Nuts and 4X Flat Washers. This set is used to clamp the turn signal onto the stem. Some models originally had a 25mm long bolt but these will interchange.

This set includes hardware for 2 turn signals. If you need enough for all 4 signals please purchase 2 sets.

Fits: Honda CB750K (1969-74)
Part #: 73-0840

Front Signal Lamp Stay Nut & Washer Set. These are the Nuts and Washers that thread into the Front Turn Signal Stays.

Set includes 2 Nuts and 2 Washers, Enough for both Front Signal Stays.

Fits: Honda CB750K (1969-72)
Part #: 49-0002

Turn Signal Flasher Relay, Replaces OEM # 38310-415-671

Fits: Honda CB750F (1977) Supersport
Part #: 10-1170

Turn Signal (Flasher) Relay. 12V/23W, 3 Prong, Comes with Rubber Mount Attached.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic

Not for Use with Custom LED Lights
Part #: 73-1104

Stock Type Screw on Reflector, 6mm thread. Replaces OEM # 33741-340-670

Fits: Honda CB750K (1972-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 11-2303

Headlight Reflector Rubber Base, Replaces OEM# 33743-375-000

This is the rubber base that the headlight reflector attaches to.

Fits: Honda CB750K (1977-78),
CB750A (1976) Hondamatic,
CB750F (1975-78) Supersport

Sold Each, order the quantity you require
Part #: 99-4976

Headlight Stay / Headlight Reflector Bolt, Replaces OEM# 90120-377-000

This is the bolt that the headlight reflectors / reflector base attach to, this bolt fastens to the headlight.

Fits: Honda CB750K (1977-78),
CB750F (1975-78) Supersport,
CB750A (1976) Hondamatic

Sold Each, 2 Used Per Bike
Part #: 99-4977

Stock Type Front Reflector Rubber Base - Replaces OEM# 33743-341-670

Fits: Honda CB750K (1969-76)
Part #: 11-2304

Reflector - Amber - 60mm.(2.36") Dia. with threaded stud & Black back.
Part #: 11-2270

Reflector - Amber - 60mm.(2.36") Diameter with threaded stud & Silver back.
Part #: 11-2371

Reflector - Red - 60mm.(2.36") Diameter with threaded stud & black back.
Part #: 11-2271

Reflector - Amber Rectangular - 1 5/8" x 2 5/8" with threaded stud & Black back.
Part #: 11-2272