Series 1: Electrical
- Ignition Systems, Ignition Switch, Coils, Plugs, Contact Points
- Headlamp, Bulbs & Parts
- Turn Signal Lamps, Stems, Lenses & Reflectors
- Tail Lights - OEM Type
- Tail Lights - Aftermarket/Custom
- Switches & Sensors
- Handlebar Switches
- Starter & Charging System
- Battery, Fuse & Relay
- Wiring Harness
- Wire Terminals & Connector Blocks
- Horns
USD$99.85 ea
Dynatek Charge Monitor
Dynatek Charge Monitor. Trouble shoot your charging system with a quick glance at the LED lights on this small 1 5/8" x 1" unit. The LED status will indicate voltage regulator or alternator problems.
The Dyna Charge Monitor is a valuable addition to vehicles with a battery ignition and a charge system as found on nearly all stock vehicles. The Charge Monitor allows easy determination of the operational state of the charging system with a quick glance at the indicator LED's. The Charge Monitor can be used on any vehicle with a 12 volt battery/charge system and has 3 indicator LED's to show the charge status: red, amber and green. When the right most red LED is on the battery is being overcharged due to a faulty voltage regulator. When the green LED is on, the battery is being charged at a normal voltage. When the left most red LED is on, the battery voltage is getting very low and the charge circuit or battery is failing.
High quality made in the USA. Comes with a one year warranty through the manufacturer.
Part #: 07-9976
The Dyna Charge Monitor is a valuable addition to vehicles with a battery ignition and a charge system as found on nearly all stock vehicles. The Charge Monitor allows easy determination of the operational state of the charging system with a quick glance at the indicator LED's. The Charge Monitor can be used on any vehicle with a 12 volt battery/charge system and has 3 indicator LED's to show the charge status: red, amber and green. When the right most red LED is on the battery is being overcharged due to a faulty voltage regulator. When the green LED is on, the battery is being charged at a normal voltage. When the left most red LED is on, the battery voltage is getting very low and the charge circuit or battery is failing.
High quality made in the USA. Comes with a one year warranty through the manufacturer.
Part #: 07-9976
USD$20.70 ea
Negative (-) Battery Cable
Negative (-) Battery Cable (Ground Cable). Replaces OEM # 32601-MG9-000
Fits: Honda CB750K (1969-75)
Part #: 23-2700
Fits: Honda CB750K (1969-75)
Part #: 23-2700
USD$19.95 ea
Positive (+) Battery Cable
Positive (+) Battery Cable with Rubber End Covers. Replaces OEM # 32401-300-010
Fits: Honda CB750K (1969-74)
CB750K (1975) For all 1975K bikes with a frame # Lower then 2503720.
Part #: 23-2701
Fits: Honda CB750K (1969-74)
CB750K (1975) For all 1975K bikes with a frame # Lower then 2503720.
Part #: 23-2701
USD$11.80 ea
Positive (+) Battery Cable
Positive (+) Battery Cable with Rubber End Covers. Replaces OEM # 32401-392-000
Fits: Honda CB750K (1977-78),
CB750F (1975-78) Supersport
Part #: 73-0107
Fits: Honda CB750K (1977-78),
CB750F (1975-78) Supersport
Part #: 73-0107
USD$11.80 ea
Negative (-) Battery Cable
Negative (-) Battery Cable (Ground Cable). Replaces OEM # 32601-392-000
Fits: Honda CB750K (1977-78),
CB750F (1975-78) Supersport
Part #: 73-0124
Fits: Honda CB750K (1977-78),
CB750F (1975-78) Supersport
Part #: 73-0124
USD$5.15 Set
Battery Box Rubber Set
Battery Box Rubber Set. Includes Battery Rubber X1, Battery Box Collar X1, Bolt X1 and Washer X1. This set fastens into the top section of the Battery Box.
Fits: Honda CB750K (1969-76) - 4 Sets Used Per Bike,
CB750K (1977-78) - 3 Sets Used Per Bike,
CB750F (1975-76) Supersport - 4 Sets Used Per Bike,
CB750F (1977-78) Supersport - 3 Sets Used Per Bike,
CB750A (1976-78) Hondamatic - 2 Sets Used Per Bike
Note: Order the Quantity of Sets you Require
Part #: 73-0910
Fits: Honda CB750K (1969-76) - 4 Sets Used Per Bike,
CB750K (1977-78) - 3 Sets Used Per Bike,
CB750F (1975-76) Supersport - 4 Sets Used Per Bike,
CB750F (1977-78) Supersport - 3 Sets Used Per Bike,
CB750A (1976-78) Hondamatic - 2 Sets Used Per Bike
Note: Order the Quantity of Sets you Require
Part #: 73-0910
USD$2.90 ea
Battery Box Rubber "A"
Battery Box Rubber "A", Replaces OEM # 50323-300-010 This rubber is fastened into the top section of the Battery Box.
Fits: Honda CB750K (1969-76) - 4 Used Per Bike,
CB750K (1977-78) - 3 Used Per Bike,
CB750F (1975-76) Supersport - 4 Used Per Bike,
CB750F (1977-78) Supersport - 3 Used Per Bike,
CB750A (1976-78) Hondamatic - 2 Used Per Bike
Note: Order the Quantity of Rubbers you Require
Part #: 73-0911
Fits: Honda CB750K (1969-76) - 4 Used Per Bike,
CB750K (1977-78) - 3 Used Per Bike,
CB750F (1975-76) Supersport - 4 Used Per Bike,
CB750F (1977-78) Supersport - 3 Used Per Bike,
CB750A (1976-78) Hondamatic - 2 Used Per Bike
Note: Order the Quantity of Rubbers you Require
Part #: 73-0911
USD$3.65 ea
Battery Box Rubber "B"
Battery Box Rubber "B", Replaces OEM # 50327-300-000
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Sold Each, Order the Quantity you Require
Quantity Used Per Bike
CB750K 1969-76 - 4 Used
CB750K 1977-78 - 6 Used
CB750F 1975-76 - 4 Used
CB750F 1977-78 - 6 Used
CB750A 1976-78 - 1 Used
Part #: 73-1040
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Sold Each, Order the Quantity you Require
Quantity Used Per Bike
CB750K 1969-76 - 4 Used
CB750K 1977-78 - 6 Used
CB750F 1975-76 - 4 Used
CB750F 1977-78 - 6 Used
CB750A 1976-78 - 1 Used
Part #: 73-1040
USD$5.15 ea
Stock Type Battery Band
Stock Type Battery Band, Replaces OEM# 95012-17001
Band Overall Size: 6.125" (155mm) Measuring from the inside of the brackets.
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 99-4936
Band Overall Size: 6.125" (155mm) Measuring from the inside of the brackets.
Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 99-4936
USD$2.90 ea
Universal Battery Retainer Strap
Universal Battery Retainer Strap
5.5" Length, Max Stretched Length 7.5"
Before Purchasing Please Check This Length Will Work For Your Bike
Part #: 10-1177
5.5" Length, Max Stretched Length 7.5"
Before Purchasing Please Check This Length Will Work For Your Bike
Part #: 10-1177
USD$10.30 ea
Battery Jumper Cables
Out of Stock
Email Me When Available
Battery Jumper Cables. 6 Feet in Length, These cables feature 10-gauge battery cables and insulated color-coded terminal clamps for safe and secure handling. The smaller clamp size easily fits motorcycle's.
Part #: 35-8020
Part #: 35-8020
USD$8.10 ea
Battery/Alternator Checker
Battery/Alternator Checker - Led Voltage, Battery and Alternator Multi-Checker for 12 Volt systems. Shows battery charge situation and high or low output of alternator.
Part #: 35-9006
Part #: 35-9006
USD$25.85 ea
Fuse Box Assembly
Fuse Box Assembly Complete with 3 Extra Fuses, Replaces OEM # 32110-341-702
Fits: Honda CB750K (1973-78),
CB750F (1977-78) Supersport
Part #: 10-6000
Fits: Honda CB750K (1973-78),
CB750F (1977-78) Supersport
Part #: 10-6000
USD$15.50 ea
Fuse Box Assembly
Fuse Box Assembly Complete with 3 Extra Fuses,
Replaces OEM # 32110-300-000
Fits: Honda CB750K (1969-72)
Part #: 10-6001
Replaces OEM # 32110-300-000
Fits: Honda CB750K (1969-72)
Part #: 10-6001
USD$29.55 ea
Fuse Box Assembly
Fuse Box Assembly Complete with 5 Fuses and Fuse Box Cover, Replaces OEM # 38200-377-305
Fits: Honda CB750F (1975-76) Supersport,
CB750A (1976) Hondamatic
Part #: 10-6002
Fits: Honda CB750F (1975-76) Supersport,
CB750A (1976) Hondamatic
Part #: 10-6002
USD$2.90 ea
Mini Blade Fuse Holder
Mini Blade Fuse Holder.
Fuses sold below #10-5031
Part #: 10-2000
Fuses sold below #10-5031
Part #: 10-2000
USD$2.20 ea
In Line Fuse Holder
Out of Stock
Email Me When Available
In Line Fuse Holder with a Space for an Extra Fuse. Terminals both have Male Ends. 5amp, 10amp or 15amp fuses can be used with this holder.
Part #: 10-2001
Part #: 10-2001
USD$2.20 ea
In Line Fuse Holder
In Line Fuse Holder. Terminals both have Male Ends. Comes with a 15amp Fuse. 5amp, 10amp or 15amp fuses can be used with this holder.
Part #: 10-2002
Part #: 10-2002
USD$2.20 ea
Plug In Fuse Holder
Plug In Fuse Holder for Custom Applications. Mutiple units can be attached.
Part #: 10-2003
Part #: 10-2003
USD$4.40 ea
Add a Fuse for Mini Fuses
Add a Fuse for Mini/ATM Fuses. 5amp, 10amp, 15amp or 20amp fuses can be used with this holder. Length 6". Fuses not included.
Fuses Sold Below #10-5031
Part #: 10-2005
Fuses Sold Below #10-5031
Part #: 10-2005
USD$17.00 Set
Deluxe 120pc. Mini Blade Fuse Set
Deluxe 120pc. Mini Blade Fuse Set in a Plastic Case.
Set Includes:
20X 5 Amp Fuses (Orange)
20X 10 Amp Fuses (Red)
20X 15 Amp Fuses (Blue)
20X 20 Amp Fuses (Yellow)
20X 25 Amp Fuses (Clear)
20X 30 Amp Fuses (Green)
Part #: 10-5031
Set Includes:
20X 5 Amp Fuses (Orange)
20X 10 Amp Fuses (Red)
20X 15 Amp Fuses (Blue)
20X 20 Amp Fuses (Yellow)
20X 25 Amp Fuses (Clear)
20X 30 Amp Fuses (Green)
Part #: 10-5031
USD$1.45 Pk/5
30mm. Glass Fuses (Pk/5)
Fuse - Pk/5 - 30mm.(1.2 inch) Glass Fuse - 10 Amp.
Part #: 10-3010
Part #: 10-3010
USD$1.45 Pk/5
30mm. Glass Fuses (Pk/5)
Fuse - Pk/5 - 30mm.(1.2 inch) Glass Fuse - 20 Amp.
Part #: 10-3020
Part #: 10-3020
USD$1.45 Pk/5
30mm. Glass Fuses (Pk/5)
Out of Stock
Email Me When Available
Fuse - Pk/5 - 30mm.(1.2 inch) Glass Fuse - 15 Amp.
Part #: 10-3015
Part #: 10-3015
USD$1.45 Pk/5
30mm. Glass Fuses (Pk/5)
Fuse - Pk/5 - 30mm.(1.2 inch) Glass Fuse - 30 Amp.
Part #: 10-3030
Part #: 10-3030
USD$1.45 Pk/5
25mm. Glass Fuses (Pk/5)
Out of Stock
Email Me When Available
Fuse - Pk/5 - 25mm.(1 inch) Glass Fuse - 7 Amp.
Part #: 10-2007
Part #: 10-2007
USD$1.45 Pk/5
25mm. Glass Fuses (Pk/5)
Fuse - Pk/5 - 25mm.(1 inch) Glass Fuse - 10 Amp.
Part #: 10-2010
Part #: 10-2010
USD$1.45 Pk/5
25mm. Glass Fuses (Pk/5)
Fuse - Pk/5 - 25mm.(1 inch) Glass Fuse - 15 Amp.
Part #: 10-2015
Part #: 10-2015
USD$1.45 Pk/5
25mm. Glass Fuses (Pk/5)
Fuse - Pk/5 - 25mm.(1 inch) Glass Fuse - 20 Amp.
Part #: 10-2020
Part #: 10-2020
USD$1.45 Pk/5
25mm. Glass Fuses (Pk/5)
Fuse - Pk/5 - 25mm.(1 inch) Glass Fuse - 30 Amp.
Part #: 10-2030
Part #: 10-2030
USD$4.40 ea
Add a Fuse for ATC/ATO Fuses
Add a Fuse for ATC/ATO Fuses. 5amp, 10amp, 15amp or 20amp fuses can be used with this holder. Length 5 2/3". Fuses not included.
Fuses Sold Below #10-5010, #10-5015, #10-5020 and #10-5030
Part #: 10-2006
Fuses Sold Below #10-5010, #10-5015, #10-5020 and #10-5030
Part #: 10-2006
USD$5.55 Pk/10
10Amp Plug In Fuses (Pk/10)
10Amp Plug In ATC/ATO Fuses (Pk/10)
Part #: 10-5010
Part #: 10-5010
USD$5.55 Pk/10
15Amp Plug In Fuses (Pk/5)
15Amp Plug In ATC/ATO Fuses (Pk/5)
Part #: 10-5015
Part #: 10-5015
USD$5.55 Pk/5
20Amp Plug In Fuses (Pk/5)
20Amp Plug In ATC/ATO Fuses (Pk/5), Used for various applications.
Replacement Fuse for 24-2004 Starter Solenoid Switch Above
Part #: 10-5020
Replacement Fuse for 24-2004 Starter Solenoid Switch Above
Part #: 10-5020
USD$5.55 Pk/10
30Amp Plug In Fuses (Pk/10)
30Amp Plug In ATC/ATO Fuses (Pk/10)
Part #: 10-5030
Part #: 10-5030
USD$1.85 Pk/5
10 Amp Blade Type Fuses (Pk/5)
Blade Type Fuse 10Amp, Pk/5.
Part #: 10-4010
Part #: 10-4010
USD$1.85 Pk/5
15 Amp Blade Type Fuses (Pk/5)
Blade Type Fuse 15Amp, Pk/5.
Part #: 10-4015
Part #: 10-4015
USD$1.85 Pk/5
20 Amp Blade Type Fuses (Pk/5)
Blade Type Fuse 20Amp, Pk/5.
Part #: 10-4020
Part #: 10-4020
USD$1.85 Pk/5
30 Amp Blade Type Fuses (Pk/5)
Out of Stock
Email Me When Available
Blade Type Fuse 30Amp, Pk/5. These fuses are used with many OEM Starter Switch Assemblies. Replaces OEM # 98200-53000
Part #: 10-4030
Part #: 10-4030
USD$8.10 ea
4-Way Fuse Block for Mini Plug in Fuses
4-Way Blade Fuse Block for Mini Plug in Fuses (ATM/MINI) Fuses. Fuses Not Included.
Transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect blade terminal, 2X 5.5mm diameter mounting holes.
Max load per block 30Amps, Max load per circuit 15Amps, Maximum voltage 12V.
Part #: 10-1994
Transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect blade terminal, 2X 5.5mm diameter mounting holes.
Max load per block 30Amps, Max load per circuit 15Amps, Maximum voltage 12V.
Part #: 10-1994
USD$8.10 ea
4-Way Fuse Block for Standard Plug in Fuses
4-Way Blade Fuse Block for Standard Plug in (ATC/ATO) Fuses. Fuses Not Included.
Transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect blade terminal, 2X 5.5mm diameter mounting holes.
Max load per block 30Amps, Max load per circuit 15Amps, Maximum voltage 32V.
Part #: 10-1996
Transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect blade terminal, 2X 5.5mm diameter mounting holes.
Max load per block 30Amps, Max load per circuit 15Amps, Maximum voltage 32V.
Part #: 10-1996
USD$9.60 ea
Deluxe 4-Way Fuse Block for Mini or Standard Plug in Fuses
Deluxe 4-Way Blade Fuse Block for Mini or Standard Plug in Fuses (ATY-N/ ATC/ ATO/ MINI/ MIN-N /MICRO 2 or MIC) Fuses. Fuses Not Included.
Deluxe transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect terminal, 2X 5.5mm diameter mounting holes.
Max load per block 30Amps, Max load per circuit 15Amps, Maximum voltage 32V.
Part #: 10-1998
Deluxe transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect terminal, 2X 5.5mm diameter mounting holes.
Max load per block 30Amps, Max load per circuit 15Amps, Maximum voltage 32V.
Part #: 10-1998
USD$9.60 ea
6-Way Fuse Block for Mini Plug in Fuses
6-Way Blade Fuse Block for Mini Plug in (ATM/MINI) Fuses. Fuses Not Included.
Transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect blade terminal, 2X 5.5mm diameter mounting holes.
Max load per block 45Amps, Max load per circuit 15Amps, Maximum voltage 12V.
Part #: 10-1995
Transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect blade terminal, 2X 5.5mm diameter mounting holes.
Max load per block 45Amps, Max load per circuit 15Amps, Maximum voltage 12V.
Part #: 10-1995
USD$9.60 ea
6-Way Fuse Block for Standard Plug in Fuses
6-Way Blade Fuse Block for Standard Plug in (ATC/ATO) Fuses. Fuses Not Included.
Transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect blade terminal, 2X 5.5mm diameter mounting holes.
Max load per block 45Amps, Max load per circuit 15Amps, Maximum voltage 32V.
Part #: 10-1997
Transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect blade terminal, 2X 5.5mm diameter mounting holes.
Max load per block 45Amps, Max load per circuit 15Amps, Maximum voltage 32V.
Part #: 10-1997
USD$9.60 ea
Deluxe 6-Way Fuse Block for Mini or Standard Plug in Fuses
Deluxe 6-Way Blade Fuse Block for Mini or Standard Plug in Fuses (ATY-N/ ATC/ ATO/ MINI/ MIN-N /MICRO 2 or MIC) Fuses. Fuses Not Included.
Deluxe transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect terminal, 2X 5.5mm diameter mounting holes.
Max load per block 45Amps, Max load per circuit 15Amps, Maximum voltage 32V.
Part #: 10-1999
Deluxe transparent plastic cover for dust and humidity protection. Standard 6.3mm quick connect terminal, 2X 5.5mm diameter mounting holes.
Max load per block 45Amps, Max load per circuit 15Amps, Maximum voltage 32V.
Part #: 10-1999
USD$37.50 ea
Pilot Indicator Light Cover
Pilot Indicator Light Cover, Replaces OEM# 37600-377-018
This includes the front and rear cover with fastening screws.
Fits: Honda CB750F (1975-78) Supersport,
CB750K (1977-78)
Part #: 99-4819
This includes the front and rear cover with fastening screws.
Fits: Honda CB750F (1975-78) Supersport,
CB750K (1977-78)
Part #: 99-4819
USD$31.05 ea
Pilot Lamp Indicator Panel Dash Light Harness
Pilot Lamp Indicator Panel Dash Light Harness, Replaces OEM# 37581-323-000 / 37581-374-670
Comes complete with bulbs.
Fits: Honda CB750K (1972-76)
Part #: 11-2181
Comes complete with bulbs.
Fits: Honda CB750K (1972-76)
Part #: 11-2181
USD$3.75 ea
Battery Box Rubber
Battery Box Rubber, Replaces OEM# 83618-323-000
Sold Each, Order the Quantity you Require
Fits: Honda CB750A (1976-78) Hondamatic
Part #: 99-4986
Sold Each, Order the Quantity you Require
Fits: Honda CB750A (1976-78) Hondamatic
Part #: 99-4986