Hide Categories

Series 1: Suspension & Wheel

USD$2.60 ea

Shock Preload Adjusting Tool

Ring Wrench to adjust shock preload.

Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-5033
USD$8.10 ea

Deluxe Shock Preload Adjusting Tool

Deluxe Shock Preload Adjusting Tool. This tool helps to adjust shock preload without damaging the shock spring collars. It fits 35mm to 75mm spring collars.

Fits: Our shock sets and many other aftermarket shocks.
Part #: 35-9108
USD$4.40 ea

Fork Cap Wrench ~24MM Size

Fork Cap Wrench ~ 24MM Size. This is a non-marring fork cap wrench that fits all motorcycles with 24MM fork caps. This wrench will allow you to remove your fork caps without worrying about damaging them.

Removes Stock 24mm Size Fork Caps on the models below
CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-9116
USD$25.85 ea

35/36mm Fork Seal Drive

35/36mm High quality carbon steel fork seal driver with split design. Use this for easy installation of 35 or 36mm fork seals on either conventional or inverted forks.

35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-4299
USD$48.05 ea

Adjustable Fork Seal Driver 35-45mm

Adjustable 35-45mm Fork Seal Driver. This high quality tool can be used on many different fork sizes. Use these for easy installation of most fork seals on either conventional or inverted forks.

35mm Forks used on Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 35-3041
USD$221.95 Set

Deluxe Fork Seal Driver Set

Deluxe Fork Seal Driver Set. This set includes 9 high quality carbon steel fork seal drivers with split design. Use these for easy installation of most fork seals on either conventional or inverted forks.

Set Contains plastic storage case and the following drivers.
-35/36mm driver
-39mm driver
-41mm driver
-43mm driver
-45mm driver
-46/47mm driver
-48mm driver
-49/50mm driver
-54mm driver
Part #: 35-9109
USD$14.75 ea

Fork Oil Level Gauge

Fork Oil Level Gauge for adjusting the oil level on all forks. Adjustable ring measures oil levels from 0-300mm in 50mm increments. 60ml capacity syringe adjusts fluid levels.
Part #: 35-1084
USD$6.60 ea

Graduated Cylinder

250 ml Graduated Cylinder

250cc (1/4 Liter) plastic Graduated Cylinder for accurate measuring of fork oil and other fluids.
Part #: 35-2210
USD$7.35 ea.

Graduated Cylinder

500cc (1/2 Liter) plastic Graduated Cylinder for accurate measuring of fork oils and other fluids.
Part #: 35-2211
USD$8.10 ea

Graduated Cylinder

1,000cc (1 Liter) plastic Graduated Cylinder for accurate measuring of fluids.

1 US Quart = 946cc (946ml.)
Part #: 35-2212
USD$9.60 ea

Strap Wrench

Strap Wrench with rubberized strap for improved grip. Ideal for holding fork tubes and other round smooth shapes.

Fits: 29-160mm. 1 1/8" - 6 1/4" diameter items
Part #: 35-9024
USD$22.15 ea

Steering Race Remover 25-35mm

Steering Head Bearing Race Remover, Range 25-35mm ID.

This tool will assist in removing motorcycle steering head bearing races. The size range is from 25mm to 35mm inside diameter. Can be driven with any hammer or mallet. Slips in the headtube solid end first until it snaps in behind the bearing race, then simply drive the race out of the frame.
Part #: 35-9123
USD$22.15 ea

Steering Race Remover 35-55mm

Steering Head Bearing Race Remover, Range 35-55mm ID.

This tool will assist in removing motorcycle steering head bearing races. The size range is from 35mm to 55mm inside diameter. Can be driven with any hammer or mallet. Slips in the headtube solid end first until it snaps in behind the bearing race, then simply drive the race out of the frame.
Part #: 35-9124
USD$13.30 ea

Metric Hook Wrench

Metric Hook Wrench, 60/65mm for Steering Head Adjustment.
Part #: 35-0005