Main Wire Harness Loom - OEM Ref. # 32100-300-050

Fits: Honda CB750K (1969-71)

NOTE: These fit model years listed. Other years of CB750 use a different OEM part number (there is a difference!).
Part #: 24-4002

Main Wire Harness Loom - OEM Ref. # 32100-341-000

Fits: Honda CB750K (1972)

NOTE: These fit model years listed. Other years of CB750 use a different OEM part number (there is a difference!).
Part #: 24-4003

Main Wire Harness Loom - OEM Ref. # 32100-341-703

Fits: Honda CB750K (1973-75)

NOTE: These fit model year and type listed, other years and types of CB750 use a different OEM part number (there is a difference!).
Part #: 24-4001

Main Wire Harness Loom - OEM Ref. # 32100-341-900

Fits: Honda CB750K (1976)

NOTE: These fit model year and type listed, other years and types of CB750 use a different OEM part number (there is a difference!).
Part #: 24-4004

Main Wire Harness Loom - OEM Ref. # 32100-405-670

Fits: Honda CB750K (1977)

NOTE: These fit model year and type listed, other years and types of CB750 use a different OEM part number (there is a difference!).
Part #: 24-4005

Main Wire Harness Loom - OEM Ref. # 32100-405-611

Fits: Honda CB750K (1978)

NOTE: These fit model year and type listed, other years and types of CB750 use a different OEM part number (there is a difference!).
Part #: 24-4006

CBTX14AHL-BS AGM Battery - # 61-2020

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport

Absorbed Glass Mat(AGM) is the latest in motorcycle battery technology. Sealed AGM batteries completely eliminate the hassels of conventional battery maintenance. There is no liquid acid in the AGM battery. All of the acid is absorbed into the compressed glass matting in the cells. They are completely Non-Spillable, so they can be shipped by U.S. Mail or UPS with no hazardous warnings or extra fees. They can be mounted in any position for special applications. Our AGM batteries re-combine the oxygen and
hydrogen as the batteries charge and discharge to make them truly maintenance free. No liquid ever needs to be added, No leaks, spills or vent tubes. AGM batteries have higher cold cranking Amps and hold a charge much longer. Replaces 12n14-3a / YB14LA2 original batteries.

AGM Batteries Feature
Batteries are wet charged at the factory but contain no liquid acid. Absorbed Glass Mat (AGM) technology eliminates the need to add electrollyte. Built to withstand the demands of high-heat applications. Lower internal resistance reduces charging time vs. conventional wet batteries. Permaseal Design is Maintenance Free and Non-Spillable. Resistant to vibration damage for reliable performance even under rough off-road conditions. Engineered to meet or exceed OEM specifications to ensure exact fit and power needs. Slower self discharge rate means AGM batteries can sit for extended periods of time without constant monitoring. A conventional wet battery discharges
15% a month where our AGM batteries discharge only 2-3% a month.
Part #: 61-2020

Battery Retainer Strap

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 10-1177

Battery/Alternator Checker - Led Voltage, Battery and Alternator Multi-Checker for 12 Volt systems. Shows battery charge situation and high or low output of alternator.
Part #: 35-9006

Battery Hydrometer - Mini Floating Ball Type Hydrometer. Ideal for a quick check of battery electrolyte condition.
Part #: 42-3503

LED Charging system indicator Gauge. Shows Voltage of your alternator rising and falling with RPM and gives a clear indication of your charging systems normal operation and early warning of problems. Gauge is Bright High Quality Chrome plated and clamps onto 7/8" Bars and can be easily wired into any point in the system (before a switched load is best). Can be mounted as shown or to handlebar by clamp (included).

Fits: All Honda CB750's (1969-1978) with 7/8" bars
Part #: 24-2660

Alternator Rotor Puller - 20mm x M1.5 Right Hand Thread Puller for pulling internal thread rotors.

Pulls Alternator Rotors on All Honda CB750's (1969-78)
Part #: 35-0030

Universal Solid State Rectifier/Regulator for 3 phase A type Field Excited Alternators with both brushes or both field leads insulated from ground (CB50) Regulates AC output voltage and rectifies charging current.

Fits: All Honda CB750's (1970-78)
Part #: 24-2032

Solid State type Rectifier unit. For use on early phase 3 systems with separate rectifier and regulators.

Fits: Early Honda CB750 models
Part #: 24-2155

Rectifier Only - 3 phase - 5 Wire - 3 AC in - 2 DC out

Made in Japan

OEM Ref. # 31700-333-008, 31700-323-015

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 24-2111