Hide Categories

Series 1: Engine

USD$20.70 ea

Chrome Spin On Oil Filter

Chrome Spin On Oil Filter
Replaces Stock OEM Housing, Filter Bolt and Paper Element Filter.

Note: When installing screw in the threaded bung first and then install the filter onto the bung.

Fits: Honda CB750K (1969-78),
CB750F (1975-76) Supersport,
CB750A (1976-78) Hondamatic
Part #: 15-1006
USD$4.40 ea

Oil Filter

Stock type Oil Filter Element (Paper Filter) - OEM Ref. # 15410-426-010 / 15410-422-004

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic

Note: If you require new oil filter o-rings, springs or washers with these they are sold below
Part #: 15-0002
USD$2.20 Set

Oil Filter O-Rings

Oil Filter O-Ring Set

Fits to the Factory type Filter Housing Assembly, Filter #15-0002 (Above)
with the following bikes

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 15-0050
USD$1.30 ea

Oil Filter Spring

Oil Filter Spring, Replaces OEM # 15415-300-000

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 15-0055
USD$1.85 ea

Oil Filter Washer - Each

Oil Filter Washer - Each
30mm OD - 20.5mm ID - .5mm Thickness
Replaces OEM# 15414-300-000

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic

Sold Each, Order the Quantity you Require
Part #: 15-0042
USD$4.40 Pk/5

Oil Filter Washer Set

Oil Filter Washer (Pk/5) - Replaces OEM# 15414-300-000 - Used with original type paper oil filter element.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic
Part #: 15-0039
USD$16.25 ea

Oil Filter Bolt

Oil Filter Bolt for stock filter & housing - OEM # 15420-300-020

Fits: CB750K (1969-78),
CB750F (1975-76) Supersport,
CB750A (1976-78) Hondamatic
Part #: 15-3020
USD$16.25 ea

Oil Filter Bolt

Oil Filter Bolt for stock filter & housing - OEM # 15420-333-000

Fits: Honda CB750F (1977-78) Supersport
Part #: 15-3022
USD$7.35 ea

Magnetic Oil Drain Plug

Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM # 92800-12000

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 15-0016
USD$1.10 ea

Drain Plug Washer

Drain Plug Crush Washer

12mm x 18mm x 1mm

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 15-0006
USD$7.35 ea

Magnetic Oil Drain Plug

Magnetic Oil Drain Plug - 14mm. Dia. x M1.5 - OEM # 92800-14000

Fits: Honda CB750A (1976-78) Hondamatic
Part #: 15-0014
USD$1.10 ea

Drain Plug Washer

Drain Plug Washer

14mm x 20mm x 1mm

Fits: Honda CB750A (1976-78) Hondamatic
Part #: 15-0000
USD$29.55 ea

Custom Performance Magnetic Oil Drain Plug ~ Joker Machine

Joker Machine Brand ~ Custom Performance Magnetic Oil Drain Plug - 12mm. Dia x M1.5 - OEM # 92800-12000

Plug features an extended length HIGH POWER "rare earth" Neodymium-Iron-Boron Magnet pressed into the body which grabs steel debris from your tank and motor exceptionally well! High Quality CNC machined part made in the U.S.A.

Works on the oil tank drain (right side of bike) and on the oil pan drain (beneath the engine) - use two for the ultimate engine oil debris collection set-up.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 73-1074
USD$52.95 Set/3

Joker Machine Oil Tank Mounting Bushing Set/3

Joker Machine Brand Oil Tank Mounting Bushing Set/3

This set is for those who are running no oil tank side covers and an exposed stock oil tank. These trim bushings and grommets are a great alternative to the stock hardware!

Stepped "Isolator" designed bushing obtains the right amount of tension on the rubber when fully tightened to reduce vibration on the oil tank. Bushing is fully CNC machined from 6061-T6 Aluminum. High quality alloy "Gold" Allen head mounting hardware is included, along with special rubber grommets.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 12-0107
USD$16.25 ea

Chain Oiler Plug ~ Joker Machine

Joker Machine Brand ~ Chain oiler (final shaft) plug eliminates the messy chain oiler assembly with one of these simple plugs! Replaces OEM # 23523-300-310

Installs easily by cleaning hole with brake cleaner to remove all traces of oil. Then fill with RTV slicone (Permatex) and tap the chain oiler plug in place.

High quality CNC machined part made in the U.S.A.

Fits: Honda CB750K (1969-75)
Part #: 73-1063
USD$8.10 ea

Oil Filter Wrench

3/8" Drive Tripod Oil Filter Wrench

Fits: Aftermarket Spin-On Cartridge Oil filters (our #15-1006) for All Honda CB750's (1969-78).
Part #: 35-9022
USD$29.55 ea

Oil Tank Cap with Dipstick

Chrome Oil Tank Cap/Dipstick Assembly with Gasket. Replaces OEM # 55105-300-010

Fits: Honda CB750K (1969-76)
Part #: 73-0053
USD$25.85 ea

Oil Dipstick with O-Ring

Oil Dipstick with O-Ring. Replaces OEM # 55105-392-000 (Dipstick) and 91354-371-000 (O-Ring).

Fits: Honda CB750F (1975-78) Supersport,
CB750K (1977-78)
Part #: 73-0082
USD$22.15 ea

Oil Passage Cap with O-Ring

Oil Passage Cap with O-Ring. Replaces OEM # 15331-300-000 (Oil Passage Cap) and OEM # 94608-40000 (O-Ring).

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport,
CB750A (1976-78) Hondamatic

Note: Sold Each, Order the Quantity of Caps you Require
Part #: 73-0077
USD$19.95 ea

Oil Pump Strainer Screen

Oil Pump Strainer Screen, Replaces OEM # 15150-300-000

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 73-0083
USD$7.35 ea

Oil Tube Plug

Oil Tube Plug, Replaces OEM # 15337-300-010

Fits: Honda CB750K (1969-70) Engine Serial # 1000220 and Higher only,
CB750K (1971-78),
CB750F (1975-78) Supersport
Part #: 73-1008
USD$33.25 Kit

Oil Pump Rebuild Kit

11 Pc. Oil Pump Rebuild Kit. Use this kit to get your oil pump flowing at maximum capacity for a healthy engine, performing at it's best!

Kit includes 1 oil stopper seal, 1 oil stopper spring, 1 oil relief valve spring, 1 oil relief valve o-ring, 3 pump connection o-rings, 2 inner rotor o-rings, 1 steel reinforced center shaft seal, 1 pump body gasket.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 73-1053
USD$22.15 ea

Tach Drive Plug Block Off ~ Black ~ Joker Machine

Joker Machine Brand ~ Black Tach Drive Plug (Block Off). This plug is generally used when the tachometer cable drive is removed and still needs to be blocked off to prevent oil leakage. This plug has an o-ring groove machined in it for better sealing.

Several bike builders just cut the stock cable off and left the Honda cable drive end installed in the valve cover. This plug is a much cleaner option in both functionality and looks. These plugs are a real nice touch when you are not using the stock tachometer, and need to eliminate the cable, or are using an electronic tach.

Installs in about a minute, no need to remove the valve cover to remove the tach drive gear assy.

High quality CNC machined part, made in the U.S.A.

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 73-1075
USD$73.95 ea

Oil Pressure Gauge Assembly ~ Black Face Plate

Oil Pressure Gauge Assembly. Includes a silver colored liquid filled gauge with a black face plate, (44mm) diameter, 0 to 100 PSI. Billet aluminum oil galley adapter, o-ring and a chrome 90° fitting included. Easily installs on the oil gally port above the points cover in minutes!

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport

Product Instructions

Part #: 23-3125
USD$73.95 ea

Oil Pressure Gauge Assembly ~ White Face Plate

Oil Pressure Gauge Assembly. Includes a silver colored liquid filled gauge with a white face plate, (44mm) diameter, 0 to 100 PSI. Billet aluminum oil galley adapter, o-ring and a chrome 90° fitting included. Easily installs on the oil gally port above the points cover in minutes!

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport

Product Instructions

Part #: 23-3126
USD$73.95 ea

Oil Pressure Gauge Assembly ~ Metal Machined Face Plate

Oil Pressure Gauge Assembly. Includes a silver colored liquid filled gauge with a metal machined design looking face plate, (44mm) diameter, 0 to 100 PSI. Billet aluminum oil galley adapter, o-ring and a chrome 90° fitting included. Easily installs on the oil gally port above the points cover in minutes!

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport

Product Instructions

Part #: 23-3128
USD$66.55 ea

Oil Pressure Gauge Assembly ~ Carbon Face Plate

Oil Pressure Gauge Assembly. Includes a silver colored liquid filled gauge with a carbon looking face plate, (44mm) diameter, 0 to 100 PSI. Billet aluminum oil galley adapter, o-ring and a chrome 90° fitting included. Easily installs on the oil gally port above the points cover in minutes!

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport

Product Instructions

Part #: 23-3127
USD$103.55 ea

Oil Pressure Gauge Assembly ~ Silver ~ Joker Machine

Joker Machine Brand ~ Oil Pressure Gauge Assembly. Silver Colored Mount Assembly with a Silver Colored Stainless Steel Marshall liquid filled gauge 1 1/2" (38mm) diameter, 0 to 100 PSI. Easily installs on the oil gally port above the points cover in minutes!

Features 2 built-in Neoprene rubber o-rings recessed in 2 fittings that have a unique rotating section that enables you to easily position the gauge for perfect rider visability. Just loosen the billet hex fitting, rotate into position, then tighten.

High quality made in the U.S.A

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 73-1067
USD$103.55 ea

Oil Pressure Gauge Assembly ~ Black ~ Joker Machine

Joker Machine Brand ~ Oil Pressure Gauge Assembly. Black Colored Mount Assembly with a Silver Colored Stainless Steel Marshall liquid filled gauge 1 1/2" (38mm) diameter, 0 to 100 PSI. Easily installs on the oil gally port above the points cover in minutes!

Features 2 built-in Neoprene rubber o-rings recessed in 2 fittings that have a unique rotating section that enables you to easily position the gauge for perfect rider visibility. Just loosen the billet hex fitting, rotate into position, then tighten.

High quality made in the U.S.A

Fits: Honda CB750K (1969-76),
CB750F (1975-76) Supersport
Part #: 73-1158
USD$209.00 ea

Oil Hose A

Oil Hose A, Replaces OEM# 15510-300-017 / 15510-300-007

Super High Quality, Made in Japan.

Fits: Honda CB750K (1969-78),
CB750F (1975-78) Supersport
Part #: 12-0146
USD$198.00 ea

Oil Hose B

Oil Hose B, Replaces OEM# 15520-300-007

Super High Quality, Made in Japan.

Fits: Honda CB750K (1969-76)
Part #: 12-0147